Custom Stainless Steel Chamfered Dowel Pins

 

These custom stainless steel dowel pins were manufactured in lengths ranging from 2-1/2" to 9" and a diameter of 1/8".  304 stainless steel material was used and the pins were factory passivated after the chamfer was applied on each side.  

Custom Precision 304 Stainless Steel Small Dowel Pins

 

We had approximately 150,000 pieces of these small precision 304 stainless steel dowel pins manufactured for our customer with split scheduled releases.  The pins measured 2.93-3.42MM in overall length with a diameter of 2.390MM +0/-.002.  Slight 0.25MM radius was applied on both sides to complete the parts.  Commercial passivation was performed prior to sorting of the parts and material certs were provided with the parts, as well as our certificate of conformance.

Custom Precision Step Pins in 303 Stainless Steel

 

These custom precision step pins were manufactured domestically in the USA using 303 stainless steel material per ASTM A581, with the raw material comprising of 3/16" round USA melt bar stock.  The outside diameter is .031" +/- .002" for the extended pin and .125" +.0005/-.0000 for the main body.  Overall length was set to .313" and a 45 degree chamfer was incorporated on both sides of the .125" diameter portion.  Full certs were provided with the parts for our customer in the medical device manufacturing industry.

Custom Large Stainless Steel Pins

 

We had approximately 10,000 pieces of these custom large stainless steel pins manufactured for a customer installation in Italy.  303 stainless steel was used for production and the pins measured .249" in diameter by 5" in overall length.  A slight 45 degree chamfer was added on both sides to remove any sharp edges.  This was a relatively simple part but needed to be manufactured quickly with all delivery to Italy within 75 days from order.