Custom Injection Molded Plastic Spacers For Construction

 

We supply our construction customer hundreds of thousands of these custom injection molded plastic spacers in a variety of sizes and colors.  Recycled material is used for both the grey and black version shown here and both have a width of 15MM but all over dimensions vary.  The larger grey spacer has an ID of 18.4MM and OD of 52.7MM while the black spacer has an ID of 11.125MM and OD of 48.72MM.  Both parts are supplied through multiple releases from 12 month blanket purchase agreements established with our customer.

Custom Metric 316 Stainless Shoulder Bolts

 

We had 24,000 pieces of these custom metric 316 stainless shoulder bolts manufactured for our design and construction customer.  The shoulder measured 4MM by 3MM and M3 X 0.5MM thread was incorporated at 5MM in length, including the relief shoulder transition.  Head diameter was at 6MM and a 2MM hex socket drive was cold formed.  

Custom Cold Headed Screws With Black Nitride Finish

 

We get these custom cold headed screws with black nitride finish manufactured 100% domestically for our gun manufacturing customer using 302 stainless steel material.  1/4-28 partial thread is rolled to .75" in length and overall length is set to 1.695".  Black nitride finish was added at 980 to 1050 degrees and effective case thickness of .0005 to .0020".  Full certs were provided with the parts and we release through multiple shipments per an annual Blanket Purchase Agreement we have with our customer.

Custom Automotive 12 Point Bolts - Grade 8

 

We had these custom automotive 12 point bolts manufactured for our aftermarket automotive customer in batches of 20,000-40,000 pieces using 4140 alloy steel material to Grade 8 specifications.  The bolts were finished with either Geomet or Zinc Aluminum and were combined with a Nitrile 70A o-ring to provide a "sealing" effect.  7/16-20 thread was rolled on the part and a .365" X .725" point was incorporated with .125" radius.  The 12 point flange head was cold formed to a height of .350".  Full certs were available with the parts and Level 3 PPAP as well.

Custom M18 Stainless Steel Hex Nuts

 

These custom M18 stainless steel hex nuts were manufactured using 304 stainless steel material with a 1.5 6H thread pitch.  The across the flats dimension tolerance was at 26.16MM-27MM and the thickness at 8.42MM-9MM.  Standard chamfers were incorporated on the corners and full certs provided to comply with our customer's requirements.