Special 1/6 X .850 Hastalloy Sensor Pin

Custom pins of virtually all types, materials, and specific requirements are Engineered Source's specialty.  We work closely with our international and domestic factories to supply special pins like this 1/16 X .850 Hastalloy Sensor Probe Pin, chamfered only on one side.  This specific part is distributed to our customer on an "As Released" blanket order basis, allowing for greater flexibility based on manufacturing and financial metrics.

PTFE Blue Coated Threaded ASTM A193 Grade B7 Studs & Heavy Hex ASTM A194 Grade 2H Nuts

Engineered Source is your supplier for PTFE coated fastener needs in the Orange County, Los Angeles, and Southern California region as a whole.  Various types of coatings are available - Xylan 1000 series, 1400 series, 142X series, Teflon, Ceramic, Mil-Spec Coatings, Halar, and Dry Film Lubricants.  The right coating selection is based on environmental considerations for the parts, such as presence of different degrees of moisture, heat, chemicals, etc.  These particular parts included B7 studs measuring 3/4-10 X 3-3/4 with accompanying 3/4-10 Grade 2H heavy hex nuts.

Special Phillips Shoulder Screw to Print - 1/8 X 1/4 With 4/40 Thread

This is a special shoulder screw to print we have supplying for a number of years, manufactured in the United States using 304 stainless steel and distributed to the customer on as needed release basis with a blanket purchase arrangement.  Lead time for an item like this based on a quantity of approximately 10,000 pieces is 8-12 weeks, with significantly shorter lead time available for a small quantity run using one of our specialty small quantity manufacturing partners.

Special DFAR Compliant MS20822-4J Machined Elbow Fitting

Engineered Source has been supplying custom machined fasteners and related products since inception, creating a strong network of quality manufacturers that have consistently proven their value in quality and timely delivery.  DFAR compliant fittings like this MS20822-4J are a common item we distribute, with any specific certifications requested by the customer.

Special machined sleeve manufactured to print - DFAR compliant & Passivated

Engineered Source is your source for hot headed, cold headed, and machined special fasteners to print like this machined sleeve.  Virtually any special material, certification, or part specific requirements can be incorporated into the process and we can assist you with your special fastener request even when small quantities are involved.  This specific part was manufactured using 304 stainless steel, passivated, and run through a water immersion test for 24 hours.  Made in USA, this special sleeve is DFAR compliant and original order quantity was for 50 pieces.

Stainless Steel Special Button Socket Screw To Print

We supplied just 15 pieces of this custom button head socket cap screw, made using 18-8 stainless steel to specifications provided by the customer.  The part measures 5/16-24 X 1 with a 1/2 dog point, with point diameter between .225 and .235.  Point length was constrained to .170-.150.  Engineered Source part number is A2300-0264.

Custom Machined PVDF Pin To Print

These special pins were individually machined to the customer's specific requirements and drawings using plastic material called PVDF.  This material is typically used for special applications requiring parts resistant to chemicals and heat, all while maintaining high levels of strength.  Since the pins are machined individually we can typically process even small quantity orders for this type of part.

Special 2/56 X 3/8 Socket Cap Screw in 18-8 Stainless Steel, Cadmium Plated

Engineered Source has supplied this part for many years on a blanket order basis - the part is a special to print socket cap screw measuring 2/56 X 3/8 and is manufactured in the United States using 18-8 stainless steel material.  Secondary service of cadmium plating with NADCAP certification is applied to finalize the cap screws for their end use.  Internal part number for this socket cap screw is SC-002006-ID.

Special 1/16 X 7/16 Coiled 302 Stainless Steel Spring Pin, DFAR Compliant

These US made spring pins are manufactured using 302 stainless steel and are available with full documentation to our customer.  They are passivated, DFAR compliant, and we get them cadmium plated (with NADCAP certification) prior to final shipment preparation.  A variety of alternative sizes and specifications are also sourced consistently.

Custom 303 Stainless Steel M6 X 31MM Socket Head Cap Screw

One of the unique aspects of this custom socket head cap screw is the unthreaded shoulder, which was to be 21mm while limiting the thread length to 10mm.  The part is manufactured using 303 stainless steel and measures M6 X 31MM.  In this case we actually manufactured only a small number of parts to the customer's requirements, at less than 20 pieces.