These custom socket head screws were manufacturer per our hydraulics component OEM customer using 316 stainless steel with factory passivated finish. The socket head was cold formed and the partial 3/8-16 thread was rolled prior to the dog point grinding and thread cleanup. The dog point design was set to .272" diameter and a length of .320" with standard chamfers. Material certs were available with the parts per customer requirements.
These custom screws were manufactured for our aerospace customer domestically using DFARS compliant A286 stainless steel material per AMS 5731. The tiny #1-64 X .135 +/-.005" screws have a fillister head cold formed with an offset cruciform drive and full thread rolled to conform to standard NAS1102 specifications. Once production was completed the parts were passivated per AMS2700 Method 1 Type 2 using a NADCAP certified facility. Full certs with FAIR were provided with the parts per customer requirements.
These custom thread cutting shoulder screws were manufactured for our high end lighting manufacturing customer using 18-8 stainless steel material. A 90 degree countersunk flat head was cold formed with a T20 pin-in security torx/6-lobe drive and approximately 6mm of M4 X 0.7MM thread was rolled with an added Type 23 thread cutting feature incorporated. The unthreaded shoulder was designed to a 3mm diameter. Full certs were included with the parts per customer request.
