These custom hex nuts were manufactured using low carbon steel material per ASME B18.2.2 with zinc clear finish. The thin height of the nuts were set to .094" +/- .005" and across the flats dimension to a 3/8" hex. Standard chamfers were incorporated with light chamfer on both sides of the tapped holes.
These custom precision machined stepped pins were manufactured using 1020 steel material with the larger diameter set to .156" +/-.001 and the smaller diameter at .092" +/-.002. The overall length measured 1.09" +/-.01 and the point incorporated a radius of R.078. Material certs were provided with the parts per customer requirements.
These custom alloy steel metric cone point set screws were manufactured in alloy steel material with M12 - 1.75 rolled thread and 60MM length underneath the cold formed square head. The square head measured 13MM X 13MM X 12MM in height. The cone point incorporated a 9MM diameter shoulder to assist in assembly on the production floor.
