Custom Phil Flat Machine Screws To Print - 1/4-28 X 13/16 In Steel With Black Oxide Finish

These custom phil flat machine screws are made domestically in the United States using low carbon steel material with black oxide finish and light oil.  We supply them on revolving 12 month blanket purchase orders with other custom hardware items the same customer purchases from us.  Initial lead time for custom machine screws like these is 5-6 weeks from order and drawing approval.

Custom Stainless Aerospace Pins - One Side Chamfered In Stainless Steel Material

These are custom stainless aerospace pins we supply on a production to order basis.  Only one side is chamfered to the customer's requirements and the custom parts are run through passivation prior to shipment.  They measure .310 at the diameter and 3" +/.02 in length.  To the customer's specifications, these custom pins are manufactured in the United States and material certs are available upon request.

Custom Flat HDPE Washers - .625 X .250 X .030 In Polyethylene Material

We supply a number of different custom flat HDPE washers like this .030 thick washer.  This specific .625 X .250 flat washer we supply to our long time customer on a blanket purchase order basis, with a 12 month initial term.  Lead time on a part like this is typically 4-6 weeks from order and drawing approval if applicable.

Custom square galvanized u-bolts made using C1018 steel material

These are custom square galvanized u-bolts we supplied to our customer in Brockport NY at 100 pieces.  They were made using C1018 steel material with hot dip galvanized finish.  1/4 coarse thread was incorporated at 1/2" length on each leg.  Inside width was at 2 inches and inside depth was at 2-1/4 inches.

Custom Stainless Button Head Cap Screws - Partially Threaded

These are custom stainless button head cap screws with partial 8-32 thread made domestically in the United States to the customer's print.  303 stainless steel material was used and the unthreaded shank of the custom screw was made to a diameter of .125".  The 8-32 threaded portion was maintained to a max .225 inches in length.  The button head diameter was maintained within a maximum of .312 inches.

Custom Socket Head Screws With A Drilled Point

These are custom socket head screws with a low profile head measuring .270 X .078 inches, made in the USA using 303 stainless steel material.  The thread incorporated is 8-32 at 7/8" in length, with the remainder of the length as an un-threaded shoulder.  The point on these custom socket bolts has a machined socket drive matching the hex drive on the low profile head.  These unique custom screws were produced in under one week for our customer's urgent needs.

Custom Machined Flat Head Screws In 303 Stainless Steel

These are custom machined flat head screws made domestically in the USA using 303 stainless steel material.  The unique application required the custom screw to have a stop shoulder machined and a 30 degree angle under the head.  10-24 thread was used for the threaded area and the head diameter was maintained at .312" +/-.005.  We supplied just 10 pieces of these custom machined screws for prototype purposes before our customer commits to a larger quantity.

NAS-1352C02-3P Socket Head Cap Screws In Cad Plated Alloy Steel

This is one of the cadmium plated NAS parts we carry on an annual blanket purchase order basis for our customer.  This NAS1352C02-3P socket head cap screw is made domestically and is supplied with material certs and certificate of conformance.  Alloy material per FF-S-86 is used with cad plating in accordance with AMS-QQ-P-416, Type II, Class 2.

Specialty MS21209F1-10 Helicoil Thread Inserts On A Strip Feed Wheel

We supply our aerospace customer base with a large variety of thread inserts like this MS21209F1-10 on a strip feed wheel for greater efficiency and convenience.  Both standard off the shelf variations and custom made to print thread inserts are available with typically short lead times.  We can supply any parts with annual volume exceeding $1,000 on a 12 month blanket purchase order basis.  All paperwork is available with the parts upon request.

Custom Internally Threaded Female Stainless Steel Standoff

This is one of the larger custom internally threaded female standoffs we supply to a medical equipment manufacturer.  Made in the USA in stainless steel material, these RoHS compliant standoffs are 1/2" across the flats on the outside dimension and 1/4-20 threaded all the way through the 5/8" length.  Our internal part number is ESIP1367-M09-F16.