Custom Metric Stainless Steel Standoffs

 

These custom metric stainless steel standoffs were manufactured using 303 stainless steel material with M3 X 0.5 tapped to a depth of 8MM on one side and unthreaded drilled hole on the other side at a diameter of 4.2MM and a depth of 10MM.  The flat machined sections were set to 7MM across the flats and the round outside section was at a radius of 8MM.  Full certs were provided with the parts.

Custom Stainless Steel Metric Male-Female Standoffs

 

These custom metric male/female standoffs were manufactured using 303 stainless steel material with commercial passivation.  M5 thread was tapped to a depth of 8MM and the male extension was machined without thread to a diameter of 3.8MM and length of 3MM.  The distance across the flats used for wrenching during the application was set to 7MM.

Custom Partial Hex Standoffs - Fully Internally Threaded In 18-8 Stainless Steel

These custom partial hex standoffs measure M6 - 1.0M X 22MM and are domestically made using 18-8 stainless steel material.  The hex height is set at 6MM and hex across the flats at 10mm.  The round standoff portion is set to 8mm for the outside diameter.  All dimensions had +/-.01MM tolerance.  Lead time to get these parts produced was approximately 6-8 weeks from production start.  Material certs were available upon request with the parts.

Custom Stainless Steel Standoffs - M3 X 12MM X 4.15MM Across The Flats

Pictured here is one of the custom stainless steel standoffs we supply our drone manufacturing customer.  Production is done in the USA in 18-8 stainless steel material, with passivation as the final step in the production process.  Lead times vary depending on the quantity required and rush options are typically available upon request.  When usage volumes exceed 25K pieces or so we typically switch production to one of our overseas partners to optimize cost per piece.

Custom Internally Threaded Female Stainless Steel Standoff

This is one of the larger custom internally threaded female standoffs we supply to a medical equipment manufacturer.  Made in the USA in stainless steel material, these RoHS compliant standoffs are 1/2" across the flats on the outside dimension and 1/4-20 threaded all the way through the 5/8" length.  Our internal part number is ESIP1367-M09-F16.