Custom Aerospace Socket Screws - NA0069A040046 Socket Head Cap Screws in 1250 MPA A286 Material

These are custom aerospace socket screws we had domestically produced for our aerospace customer at 50 pieces.  The trickiest part was the 1250 MPA requirement that our customer insisted on, which is a deviation from the standard NA0069A040046 specification.  We were able to supply the custom part faster than our original promise date at approximately 3 weeks from order receipt.  M4-0.7 thread was incorporated and test results confirmed 39-40 HRC after AMS 2759/3 Rev. F heat treat process.  NADCAP certified passivation per AMS-2700 was also performed and all certifications were provided to our customer with the parts.

Custom Eye Bolts - 5/16 X 1-3/8 Stainless Steel Custom Eye Bolt With Coarse Thread

These are custom eye bolts we supplied in 304 stainless steel material, with nuts and washers per our customers requirements.  5/16" coarse thread and bar stock was used and the parts were bent to create a 1-3/8" inside eye diameter and approximately 1" of thread.  Material certs were made available to the customer with the parts and the lead time to produce 75 pieces was approximately 7 business days.

Custom Unique Thread Pitch Screws - 3/8-20 X 1-1/4 Socket Head Cap Screws in 18-8 Stainless Steel Material

These custom unique thread pitch screws were one of the stranger projects that we came across - it was the first time in over 20 years that someone requested a 3/8-20 thread pitch.  We had the custom screws manufactured domestically at just 40 pieces using 18-8 stainless steel material.  The lead time was at approximately 3 weeks from order confirmation.

Custom 4140 Steel Shoulder Bolts - M11.5 X 136MM With Special Hex Head, 37-44 RC, Special Dog Point

These are custom 4140 steel shoulder bolts we supplied to our automotive customer at 100 pieces.  4140 steel material was used with heat treat to achieve 37-44 RC, with plain finish.  The shoulder measured M11.5 x 136MM with a 1.15MM groove approximately 35MM from the special hex head.  The special dog point measures 10.447MM/10.540MM by 5.7MM in length.  Lead time for this 100 piece domestic batch was approximately 6 weeks from order confirmation.

Alloy Steel Set Screws With Nylon Strip - DIN913 M6 X 1M X 16MM Socket Set Screw With Flat Point

We supply countless parts with a variety of different thread locking patches, thread locking pellets, and thread locking strip applications like these alloy steel set screws with nylon strip.  These thread locking features provide for a vast variation in applications we can accommodate.  We can typically provide samples to allow our customer to test different types, lengths, and combinations prior to committing to a full production volume.

Small Custom Plain Steel U-Bolts - 5/16-18 X 1.38" With Rolled Thread

This is one of our small custom plain steel u-bolts made domestically to our customer's drawing and tolerances.  Only 20 pieces were required and 5/16-18 rolled thread was requested with a .06 X 45 degree chamfer requested and undersized first two threads.  The center to center dimension was set at .81", inside length at 1.38" and thread length at .62".  Lead time was approximately 4-5 weeks since the customer was not in a rush to get the parts sooner.  Faster lead time was available in needed.

Custom Brass Bushings - 0.688 X 0.875" Machined Bushings In Plain Brass Material

These are custom brass bushings we supply our automotive customer on a recurring blanket purchase order basis, with monthly releases based on their usage.  They are manufactured overseas in Taiwan and maintain +/-.009 tolerance on the outside and inside diameter, as well as the length.  The inside diameter is set at 0.500 inches, the outside diameter is at 0.688 inches, and the overall length is set at 0.875 inches.  Production runs at approximately 10,000 pieces at a time with a lead time of 120-150 days including ocean freight transit from Taiwan.

Custom Stainless Threaded Studs - 6-32 X 7/8 Fully Threaded 18-8 Stainless Steel Studs

These are custom stainless threaded studs, fully threaded at 6-32 diameter and pitch.  They were cut and chamfered on both sides to 7/8 inch lengths and production was run at 550 pieces +/- 10%.  Lead time for these custom threaded studs was approximately 4-6 weeks but faster options were available to our customer if urgent need arose.  All parts were passivated to complete the production process and were supplied with material certs and a certificate of conformance.

Custom Metric Socket Cap Screws - M2-0.4M X 6MM Socket Head Cap Screws In DFARS Compliant 303 Stainless Steel

These are M2 X 6MM DFARS compliant socket cap screws whose simplicity in look is misleading to say the least.  We were tasked to replicate our customers existing samples and the combination of the hex broach dimensions and depth together with the countersunk angle required a different approach than a standard flat socket head screw.  The part was initially made like a standard socket cap screw without the countersink, broached to required depth, and then machined down for the countersunk angle.  Finally the part was then threaded and passivated.

Custom Aluminum Standoffs - 6-32 X 4" Female/Female Round Standoffs

These are 6-32 female/female custom aluminum standoffs measuring 4 inches in overall length and tapped 3/8" deep on each end.  Outside diameter is 1/4".  Production was done overseas for optimal cost and lead time for the first release is typically at 120-140 days.  This part we supply on a revolving annual blanket release arrangement that allows our customer to spread out the cost over the year as they use the parts.