We supplied these custom stainless steel hex standoffs to our electronics customer operating their production in New York. 18-8 stainless steel was used and the critical length dimension was set to .615" +/- .01". #4-40 internal thread is incorporated. Our internal part number for this item is 260-302508-001 and the lead time varies significantly depending on the quantity requested.
Search Our Custom Fasteners
Showing posts with label custom standoffs. Show all posts
Showing posts with label custom standoffs. Show all posts
Tuesday, March 12, 2019
Custom Stainless Steel Hex Standoffs - 4-40 X .615" In 18-8 Stainless Steel Material
Location:
Los Angeles, CA, USA
Tuesday, November 27, 2018
Custom Partial Hex Standoffs - Fully Internally Threaded In 18-8 Stainless Steel
These custom partial hex standoffs measure M6 - 1.0M X 22MM and are domestically made using 18-8 stainless steel material. The hex height is set at 6MM and hex across the flats at 10mm. The round standoff portion is set to 8mm for the outside diameter. All dimensions had +/-.01MM tolerance. Lead time to get these parts produced was approximately 6-8 weeks from production start. Material certs were available upon request with the parts.
Location:
Los Angeles, CA, USA
Thursday, February 1, 2018
Custom Electronics Standoffs In Plain Brass Material With 2-56 Thread
These are custom electronics standoffs we supplied to our customer at just 100 pcs for testing purposes. 2-56 thread was incorporated to run all the way through the part measuring 0.32" in overall length. The thicker portion of the custom standoff measures .13 inches, with the diameter at .22 inches. Its thinner section has a diameter of .14 inches.
Labels:
custom brass hardware,
custom electronics fasteners,
custom electronics hardware,
custom standoffs
Location:
Layton, UT, USA
Friday, January 19, 2018
Custom Stainless Standoffs - Male/Female In 304 Stainless Steel Material
These are custom stainless standoffs made using 304 stainless steel material in accordance with ASTM A276 and passivated to ASTM A380. Approximately 100,000 pieces were produced domestically with full certifications. 4-40 thread was incorporated on both male and female parts, with the male part measuring .750 inches and female hex measuring .320 inches in length. Width across the flats on the hex measures .250 inches.
Labels:
custom electronic hardware,
custom spacers,
custom stainless hardware,
custom standoffs,
stainless standoffs
Location:
Ogden, UT, USA
Subscribe to:
Posts (Atom)