Custom Bent Eye Bolts & U-Bolts In A36 Steel Material - 3/4-10 Thread

These custom bent eye bolts were produced together with matching large round u-bolts in A36 material.  3/4-10 thread was incorporated on both parts and 6 eye bolts were produced together with 21 u-bolts, a relatively small production run.  Parts were produced within 4 days of order confirmation but could have been done faster with an expedited rush order and fee if necessary.  The diameter of the eye was set to 1-1/2" and the thread length was set to 2-1/2".  We were approx 1/4" shy of the thread length requested however as going beyond that would encroach onto the bending material.  The round u-bolts were made to 3-1/2" between the legs and 4" for the inside length.  1" of 3/4-10 thread was incorporated on each leg.

Custom Zinc Plated U Bolts - 5/16 X 3-1/2 With Plates & Hex Nuts

These are custom zinc plated u bolts we supplied to our customer at 150 sets that included 2 hex nuts per u bolt and a flat plate measuring 1/8 X 2 X 3-1/4 inches.  The lead time without any rush service was at 2 weeks from order confirmation.  Material certs were provided with the parts per customer specifications.  The inside width of the u bolt was set at 2 inches, inside length at 3-1/2, and 2 inches of 5/16 coarse thread was incorporated on each leg.  The sets were delivered to the customer fully assembled as shown in the picture.

5/8-11 Custom Galvanized Round U Bolts in A36 Steel Material - 5/8 X 10-1/2 Inside Depth

These are custom galvanized round u bolts we supplied a customer in Belleville, New Jersey at just 12 pieces.  A36 material was used with galvanized finish.  Four galvanized hex nuts, two flat washers, and two split lock washers were included with each custom u bolt.  5/8-11 thread was incorporated at 5 inches in length on each leg and the inside width was 8-1/2 inches.  Inside depth was at 10-1/2 inches.  Material certs were provided with the parts per customer's specifications.

Custom Square U Bolts - Made Using 304 Stainless Steel With 1/2-13 Thread

These are 1/2 diameter custom square u bolts we supplied to a construction company in urgent need, at small quantity of just 6 pieces.  With a rush service we were able to ship these custom parts within 4 days from order confirmation.  They incorporate approximately 4 inches of 1/2-13 thread, with the inside width at 4-1/2 inches and inside depth at 18 inches.  Material certs and stainless steel hex nuts were supplied as well per the customer's request.  Our internal part number for these custom square u bolts is USB050288-I.

Special U-Bolts In Stainless Steel Material

We have been supplying a diverse range of custom U-bolts to the construction, plumbing, and HVAC industry for over 20 years.  This is a custom 3/8 diameter 304 stainless steel U-bolt at 6-3/4 inch inside width, 7-7/8 inch depth and approximately 2-1/2 inches of coarse thread.  Lead time for parts like this varies based on material, size, and quantity but is typically between 3-5 days from order.