Custom 316 Stainless Sheet Metal Screws With Tin Cobalt Chrome Plating - 6-18 X 5/8" Type A SMS

These are custom 316 stainless steel sheet metal screws with tin-cobalt RoHS compliant chrome plate finish, with the 316 stainless steel designated by a dot on the head of each screw.  Like the other custom tin cobalt chrome plated screws, these type A 6 X 5/8 phil pan sheet metal screws are manufactured overseas and supplied to our long time customer on a revolving blanket purchase order basis.  The tin cobalt chrome plating is done in a barrel plate format for improved cost efficiency while still producing a very attractive cosmetic finish.  Tin cobalt finish typically provides a slightly duller chrome finish than the traditional hexavalent chromium plating.  All the custom tin cobalt plated parts we supply are electroplated with a bright nickel under-plate for improved longevity and appearance.

Custom Assembled Galvanized U Bolts - 1/2 X 5" With Custom Plates & Nuts

These are round custom assembled galvanized u bolts made using A36 steel material with hot dipped galvanized finish, made domestically at 1,000 pieces.  Custom 5/16 X 1-1/2 X 4-1/2 galvanized steel plates were produced to fit the u-bolts.  Per our customer's specifications we delivered the 1,000 sets fully assembled with the plate and two washers per u-bolt set.  The u bolts were made with an inside width at 2-3/4" and an inside depth of 5".  Three inches of coarse thread were incorporated on each leg.  Our internal part number is AUB050080-N.

Custom Metric Threaded Studs - M30 X 3.5M X 338MM In ANSI 1008 Material Plain

These are custom metric threaded studs we supplied a customer in Orange County at 200 pieces.  They were manufactured domestically with a lead time of 2-3 weeks, made using ANSI 1008 material with material certs and chemical composition specs included.  ASME B1.13M-2005 M30X3.5M thread was required and the overall length for each stud was maintained at 338MM.  Our internal part number for this threaded stud is ATR-M30X35X388MM.

3/8 Diameter Custom Stainless Steel U Bolts - 3/8-16 X 4-1/2 In Type 304 Stainless Steel Material

These are round 18-8 stainless steel 3/8 diameter custom stainless steel u bolts we supplied to our customer in Naples FL.  The inside width was set at 1/2" and the inside depth was 4-1/2".  2 inches of standard coarse thread was incorporated to the customer's requirements.  Our internal part number is UB037072-I and the lead time for these parts was at 5 business days from order confirmation.

Custom 316 Stainless Steel Threaded Studs Cut & Chamfered - 3/4-10 X 11-1/2

These are custom 316 stainless steel threaded rods cut and chamfered to 11-1/2 lengths.  We supplied this specific order at just 36 pieces with 3/4-10 thread.  Material certs were supplied with the parts per the customer's request and the lead time was at just 3-4 days from the initial order.  Our internal part number for these custom 316 stainless steel studs is ATR-075C11.5-J.

Tin Cobalt Chrome Plated Sheet Metal Screws - 6 X 3/8 Phillips Flat Type A In 316 Stainless Steel

These are custom type A tin cobalt chrome plated sheet metal screws made using type 316 stainless steel, designated by a dot on the head of each screw.  Like the other custom tin cobalt chrome plated screws, these type A 6 X 3/8 phil flat sheet metal screws are manufactured overseas and supplied to our long time customer on a revolving blanket purchase order basis.  The tin cobalt chrome plating is done in a barrel plate format for improved cost efficiency while still producing a very attractive cosmetic finish.  Tin cobalt finish typically provides a slightly duller chrome finish than the traditional hexavalent chromium plating.  All the custom tin cobalt plated parts we supply are electroplated with a bright nickel under-plate for improved longevity and appearance.

Custom 1/2 U Bolts In 316 Stainless Steel Material - 2 Inches Center To Center & 5-1/4 Inches In Length

These custom 1/2 U bolts in 316 stainless steel material were manufactured at just 8 pieces within 1 week from order.  They were supplied with a pair of standard hex nuts and hex jam nuts in 316 stainless steel for each u bolt.  3.5 inches of coarse thread was incorporated on each leg and the inside width was maintained at 1.5 inches.

Custom Oval Point Set Screws - 7/16-14 X 7/8 in 18-8 Stainless Steel Material

These are similar to other custom oval point set screws we supplied to the same customer - they are also manufactured domestically in the USA at just 100 pieces in 304 stainless steel material.  Lead time for production was just 7 business days, with another 3-4 days for shipping to our Santa Ana location.  These custom set screws measure 7/16-14 X 7/8 and our internal part number is SSO-4314-I.

Custom Nylon Flat Washers - .4950 X 3180 X .0310

These are custom nylon flat washers we supply to a long time customer on revolving as-released blanket purchase order basis.  Estimated annual usage is approximately 100,000 pieces.  They are manufactured domestically and stocked at our Santa Ana location.  Lead time for the initial release is typically at 45-60 days from an approved purchase order.  The custom washer measures .0310 at the thickness, .4950 on the outside diameter, and .3180 at the inside diameter.

Custom Black Oxide U Bolts - 7/16-14 X 1-7/16 Round In Steel Material

These are custom black oxide U bolts domestically manufactured for our machine and tooling component manufacturing customer at just 318 pieces.  7/16-14 thread was incorporated on each leg at 5/8" in length and the inside width was maintained at 5/8".  The inside length was 1-7/16.  Our internal part number for these u bolts is UB044023-F.