Custom Bent Anchor Bolts - 3/16 Diameter in 316 Stainless Steel Material

Pictured here are custom bent anchor bolts made domestically using 316 stainless steel material.  10-24 thread is used on one leg at approximately 7/8" in length.  An 85 degree bend was incorporate per customer's print, with the thread containing leg measuring 1-3/4" and the short leg measuring 1-1/2".  Lead time for smaller quantities (in the hundreds) is 5-7 business days if plain 316 stainless steel material is used.

Custom Chrome Plated Screws - 10-12 X 1 Phil Flat Type A Sheet Metal Screws In 316 Stainless Steel

These are custom chrome plated screws made using the barrel plating process done domestically in the USA.  They are type A sheet metal screws made in 316 stainless steel material specifically to our customer's print.  The overall process to manufacture the screws and to get them barrel chrome plated took approximately 12 weeks.  Depending on the volume involved we can work out the ideal domestic or overseas strategy for any chrome plated parts, both RoHS and non-RoHS compliant.

Custom Captive Stainless Screws - 10-32 X 1.76 In 18-8 Stainless Steel Material

These are custom captive stainless steel screws we supplied to our construction customer, who refers to them as "Gripper Screws".  Production was done domestically in the USA at approximately 5,000 pieces and a lead time of 6-8 weeks.  The multi-step flat head was made using a cold heading process and the 10-32 thread was rolled at 0.2" in length.  The diameter of the unthreaded shoulder was set at 0.14" +/-.015.

Custom 316 Stainless Steel Round U-Bolts - 3/8 X 5 With 3-1/2 Inches of Thread

These are custom 316 stainless steel round u-bolts we supplied to our customer at a bit over 100 pieces.  Lead time was at about 6-7 business days from order and material certs with certificate of conformance were provided with the parts as well per our customer's request.  The inside width is 2-5/8", inside length is 5", and approximately 3-1/2" of thread are incorporated at each leg.  Rush service is available upon request.

Custom L Brackets In Plain Steel Material - 3/4" x 1/2"

These are custom L brackets we provided our long time OEM customer.  We initially had 100 pieces produced for testing and engineering inspection prior to a full commitment for 20,000 estimated annual usage.  Plain low carbon steel material was used and the initial sample lot of 100 pcs was done within 1 week of print confirmation.  The outside dimensions were 3/4 X 1/4 on the narrow side and 1/2 X 1/2 on the wider section, with 1/8" diameter holes drilled 1/2" from the 90 degree angle on each side.

Custom Flat Socket Head Cap Screws - 2-56 X .335/.345 In 18-8 Stainless Steel Material

These are custom flat socket head cap screws manufactured domestically using 18-8 stainless steel material.  The production run was relatively low in quantity at approximately 10,000 pcs, with a standard non-expedited lead time of 6-7 weeks.  Material certs, certificate of conformance, and passivation certs to QQ-P-35 were provided with the parts.

Custom Thin U Bolts - 3/16 X 3 Round U Bolt in 1018 Steel Material

These are custom thin U bolts made domestically using 1018 plain steel material at approximately 600 pcs.  Lead time for production was 6 business days and each custom round u bolt was supplied with a pair of hex nuts, flat washers, and split lock washers.  Material certs and certificate of conformance was provided with the shipment per our customer's request.

Custom Ribbed Neck Carriage Bolts - 1/4-20 X 7/8 In Grade 5 Steel Material With Zinc & Bake

These are custom ribbed neck carriage bolts we supply to one of our oldest customers.  They measure 1/4-20 X 7/8 and are manufactured domestically in the USA in Grade 5 steel material, with zinc and clear finish.  Production lead time is typically approximately 6-7 weeks for this custom part and all certs are available upon request.

USA Galvanized U Bolts - 1/2 X 5-1/4" In A307 USA Melt Steel Material, HDG

These are custom USA galvanized u bolts manufactured domestically using US melt steel.  Our customer ordered this 1/2 X 5-1/4" together with 5 other size variations.  Rush lead time was approximately 8-10 business days due to the galvanizing process.  This specific version has an inside width of 3-5/8", 1/2-13 thread of approximately 1-1/2 inches on each leg, and inside length of 5-1/4".  Material certs and a C of C was provided with the parts per our customer's requirements.

Custom Metric Button Socket Screws In 18-8 Stainless Steel Material - M3 X 0.5 X 7.24MM

These are custom metric button socket screws we supply to our long time customer in 18-8 stainless steel material.  It is an M3 X 0.5 X 7.24MM button socket head cap screw with a 2MM hex socket drive at 1.04" minimum depth.  Production lead time is typically between 6 and 8 weeks, done domestically and supplied with material certs and certificate of conformance.  Our internal part number is 110319.