Special Flat Washer in Steel Zinc

This is a special steel washer made to ID of 1.504, OD of 2.187, and TH of .062 with standard tolerances in place per customer's specifications.  We supply hundreds of special washers in a variety of materials and parameters, both on an as-released blanket purchase order basis and single order release basis.  Custom washers like this typically have a lead time of 6-8 weeks from a PO.

Special Captive Screw With O-Ring

This is a special captive screw measuring 10-32 X 2-3/8 manufactured in the United States using 18-8 stainless steel material.  It has a standard pan head with a phillips drive and is partially threaded to act as a captive/panel screw.  An o-ring is incorporated on each screw to our customer's specifications.  We have carried this part on a blanket as-released purchase order basis for the same customer for over five years.

Special DIN965 Metric Phil Flat Machine Screw

This is a special phillips flat DIN965 machine screw measuring M3 X 0.5 X 9MM and manufactured in the USA using steel with zinc plating finish.  These parts we typically supply to our customer with a production run for each order at the quantity requested, typically around 3,000 pieces.  While a variety of M3 X 0.5 DIN965 screws are available as standards, the 9MM length is often an impossible item to find off the shelf and requires production as a special.

Special 1/16 X 1/4 Dowel Pin in 420 Stainless Steel

This is a special dowel pin made for our aerospace customer using 420 stainless steel material at just 100 pieces.  After production the pins were separately passivated using a NADCAP certified facility using a process of passivation with descaling and a 24 hour water immersion test that is typically recommended for 400 series stainless steel materials.

Special Grade 8 Socket Cap Screw With Black Oxide & Oil Finish

This is a special 10-32 X .590 socket head cap screw made in the USA using Grade 8 steel with black oxide finish.  It is a part we have supplied for many years on a blanket as-released purchase order basis, typically holding 6-12 months of supply at all times to allow for maximum flexibility to our customer.

Special 8-18 Partially Threaded Machine Screw With Tapered Point

This is a special partially threaded machine screw supplied to our customer at 30,000 pieces.  The part is made using 18-8 stainless steel and is slightly tapered at the point to allow for faster use in the customer's application.  The head is a slightly off-standard pan head with a phillips drive.  Parts are made in the United States.

Special Slotted Fillister Head Machine Screw In 18-8 Stainless Steel

This is a special 2-56 X .625 inch slotted fillister machine screw in 18-8 stainless steel material, made in the USA at a relatively small quantity batch of 500 pieces.  Parts are provided to our aerospace customer with a AS9102 compliant First Article Inspection Report (FAIR) and a number of required certificates.

Special Dowel Pin to Print In 303 Stainless Steel

We supply a wide range of special pins in materials varying from PVDF to 303 stainless steel like these special to print 3/16 X 7/16 dowel pins.  This pin has been provided to our customer using the same trusted factory for over five years.

Special Leveling Threaded Feet With A Rubber Base

We supply our customers with a number of special to print and standard off the shelf levelers like this 1/4-20 threaded part measuring 1-1/2 inches in length and a 2-1/8 inch base diameter.  These levelers can be provided with a number of different materials, finishes, and specific options catering to the customer's project needs.  They are made in the USA and are currently supplied to our customer based on a blanket purchase basis.

Special PVDF 1/16 X .415 Micro Pin

We supply a number of PVDF pin parts like this 1/16 X .415 version to a customer that deals largely with water treatment applications.  Together with a variety of other special hardware parts we supply this special pin on an annual blanket as-released purchase order basis.  We try to maintain a minimum 6 month supply to provide our customer optimal flexibility.