Precision Custom Stainless Steel Dowel Pins - .1160 X .625 Made to Customer's Drawing

This is a small batch of custom stainless steel dowel pins manufactured domestically in the USA at just 36 pieces.  303 stainless steel was used and the custom dowel pins measure .1160 at the diameter by .625 inches in length.  The diameter was the most critical dimension with a tolerance of +/-.0001".  Both sides were chamfered at .010 X 45 degrees and +/-.005 tolerance was called for on the length.  We were able to get production completed and parts shipped in less than 2 weeks from order confirmation.

Custom Square U Bolts - Made Using 304 Stainless Steel With 1/2-13 Thread

These are 1/2 diameter custom square u bolts we supplied to a construction company in urgent need, at small quantity of just 6 pieces.  With a rush service we were able to ship these custom parts within 4 days from order confirmation.  They incorporate approximately 4 inches of 1/2-13 thread, with the inside width at 4-1/2 inches and inside depth at 18 inches.  Material certs and stainless steel hex nuts were supplied as well per the customer's request.  Our internal part number for these custom square u bolts is USB050288-I.

Custom Oversized U-bolts - 1" Diameter X 48" Length In A36 Galvanized Steel Material

These are some of the larger custom oversized u-bolts we have supplied.  1" diameter A36 steel material was used, hot dip galvanized, with approximately 4 inches of coarse thread.  Inside width was 46 inches and the inside length was maintained at 48 inches.  Our customer was in a big rush and we were able to get these two large custom u-bolts done in just 3 days.  A pair of galvanized hex nuts and washers was included with each u-bolt.

Nylon Pellet Set Screws For Aerospace Applications - 8-32 X 1/2 Socket Set Screw With Cup Point in 18-8 Stainless Steel

These are specialty nylon pellet set screws we supply our long time aerospace customer on scheduled release blanket purchase order basis.  The cup point set screws are made in the USA using 18-8 stainless steel material and are then run through the nylon pellet secondary operation.  Our customer using approximately 500 pieces every six months and the lead time to prepare the initial shipment for these nylon pellet set screws is typically 1-2 weeks from order. Our internal part number is SSC-0808-INPELL.

Custom Nylon Point Set Screws - 8-32 X 1" In Stainless Steel Material

We supply our electronics manufacturing customers a large array of custom and specialty fastener products like these custom nylon point set screws.  The set screws themselves are domestically made using 18-8 stainless steel per our customer's specifications.  Lead time for 3,000 to 5,000 pieces is typically 2-3 weeks from order confirmation.

Custom Round Galvanized U-Bolts - 1/2 X 10-1/4 A36 Steel Material HDG

This is another one of our countless custom round galvanized u-bolts made to order using A36 material with hot dip galvanized finish.  It was manufactured domestically in the USA and supplied to our customer as a one time order of 100 pieces.  The custom u-bolt has 1/2 coarse thread at 1-1/2 inches on either leg and 10-1/4 inside depth.  Inside width is measured at 2-1/2 inches.

Custom Coil Compression Springs - Music Wire At .471" Outside Diameter

These are one of the many custom coil compression springs we supply our customer base, made in the USA using music wire with revolving 12 month blanket purchase orders.  The outside diameter measures 0.471 inches, the free length is at 1.391 inches, and the custom springs maintain 9.4 coils.

Custom Phil Flat Machine Screws To Print - 1/4-28 X 13/16 In Steel With Black Oxide Finish

These custom phil flat machine screws are made domestically in the United States using low carbon steel material with black oxide finish and light oil.  We supply them on revolving 12 month blanket purchase orders with other custom hardware items the same customer purchases from us.  Initial lead time for custom machine screws like these is 5-6 weeks from order and drawing approval.

Custom Stainless Aerospace Pins - One Side Chamfered In Stainless Steel Material

These are custom stainless aerospace pins we supply on a production to order basis.  Only one side is chamfered to the customer's requirements and the custom parts are run through passivation prior to shipment.  They measure .310 at the diameter and 3" +/.02 in length.  To the customer's specifications, these custom pins are manufactured in the United States and material certs are available upon request.

Custom Flat HDPE Washers - .625 X .250 X .030 In Polyethylene Material

We supply a number of different custom flat HDPE washers like this .030 thick washer.  This specific .625 X .250 flat washer we supply to our long time customer on a blanket purchase order basis, with a 12 month initial term.  Lead time on a part like this is typically 4-6 weeks from order and drawing approval if applicable.