Search Our Custom Fasteners

Saturday, December 21, 2024

Metric Custom Long Socket Head Screws

 

Metric Custom Long Socket Head Bolt Manufacturers
These custom socket head screws were manufactured to our customer's drawing with a long length of 289MM under the head, with half of the length threaded with rolled thread.  The screws were made to class 8.8 specification with a standard hex socket drive and coarse M6 diameter thread.  Material certs were available with the parts per our customer requirements.

Custom Automotive Black E-Coat Shaft Collars

 

Custom Automotive Black E-Coat Shaft Collar Manufacturers
These custom automotive shaft collars were manufactured using Grade 5 steel material to an outside diameter of 71MM, width of 19MM, and gap of 5MM.  M8 - 1.25 thread was tapped on both sides for the socket head assembly bolts.  The shaft collars were finished with black color E-coating and individually packaged for optimal protection in transit.  Full level 3 PPAP documentation was provided with the parts per our customer's requirements.

Thursday, November 14, 2024

Custom Tempered Steel OEM Stamped & Bent Brackets

 

Custom Tempered Steel OEM Stamped & Bent Bracket Manufacturers

These custom stamped brackets were manufactured using tempered .063" thick steel sheet material for our specialty OEM customer.  A number of features were incorporated, from .126" diameter round openings to 4-40" thread tapped holes.  Overall length was 1.45" and the brackets were finished with black oxide (commercial spec) prior to packaging.  Full certs were provided with the parts.

Monday, November 11, 2024

Custom Internally Threaded Stainless Ball Studs

 

Custom Internally Threaded Stainless Steel Ball Stud Manufacturers
These custom internally threaded stainless steel ball studs were manufactured using 303 stainless steel material with 12-40 internal thread inside the ball stud and also 10-24 external thread rolled on the male portion.  Three different length variations on the male thread length were produced per our customer's requirements.  Full certs were available with the parts.

Friday, November 8, 2024

Custom A286 Stainless Domestic Hex Nuts

 

Custom A286 Stainless Domestic Hex Nut Manufacturers
These custom 1/4-20 A286 stainless steel hex nuts were manufactured domestically for our aerospace/drone manufacturing customer.  DFARS compliant material was used for the production and the hex nuts were made to a 7/16 across the flats specification and 7/32 in height.  Full certs were provided with the parts. 

Tuesday, November 5, 2024

Custom Grade 5 Hex Bolt, Nut, and Washer Kits

 

Custom Grade 5 Hex Bolt, Nut, and Washer Kit Providers
These custom automotive fastener kits included grade 5 5/16-24 partial thread hex bolts, split lock washers, and grade 5 hex nuts.  All parts were black oxide finished prior to poly bagging into individual kits per our customer's specifications.  All certs were available with the parts and standard description labels were used on all poly bags.

Monday, October 7, 2024

Custom Domestic Stainless Steel Wave Washers

 

Custom Domestic Stainless Steel Wave Washer Manufacturers
These custom 3-wave washers were manufactured domestically in the USA using DFARS compliant 301 stainless steel material.  The outside diameter was set to 1.325" and the inside diameter to .975".  Raw material thickness was at 0.05" +/-.015.  Full certs were provided with the parts for our aerospace customer.

Friday, September 6, 2024

Custom Music Wire Torsion Springs

 

Custom Music Wire Torsion Spring Manufacturers
These custom torsion springs were manufactured using .090 diameter music wire material with .80-.95% carbon content and 230-399 ksi tensile strength.  Both legs measured 4.45" center to center with a 120 degree angle.  Zinc clear finish was applied to finish the parts for the architectural assembly application.

Wednesday, August 28, 2024

Custom Grade 5 Hex Coupling Nuts

 

Custom Grade 5 Hex Coupling Nut Manufacturers
These custom coupling nuts were manufactured using mild steel material with zinc clear finish.  1/2-13 thread was tapped all the way through the part at an overall length of 3/4".  5/8" across the flats bar stock was used to produce these parts.  

Monday, July 22, 2024

Custom Zinc Plated Flat Washers

 

Custom Zinc Plated Flat Washer Manufacturers
These custom flat stamped washers were manufactured using low carbon steel material with zinc clear plated finish.  The washer outside diameter was set to .344" and the inside diameter to .210".  Thickness was designed to a .031" +/-.002" prior to the zinc plated finish.