These are custom V bolts we had manufactured domestically for our robotics customer. A36 steel material was used with zinc yellow and bake finish process. 5/8-11 thread was incorporated on both legs, at 2 inches in length. Center to center inside width was set at 4-1/2 inches, with the inside length set at 5.88 inches. The inside angle at the V was set to 90 degrees.
Search Our Custom Fasteners
Showing posts with label custom v bolts. Show all posts
Showing posts with label custom v bolts. Show all posts
Thursday, April 11, 2019
Custom V Bolts - 5/8 Diameter In A36 Material With Yellow Zinc Finish
Location:
Los Angeles, CA, USA
Tuesday, February 5, 2019
Custom V Bolts In Steel Zinc Material - 8-32 Thread
These are 8-32 custom V bolts we had domestically produced for our customer. Initially 12 pieces were run for prototype testing purposes prior to full production order. The inside length to the bottom of the V is 1" and .625" between the legs. 0.6" of 8-32 thread is incorporated on both legs. One thing to note with this type of bent part is that the threaded areas are clamped during the bending process - at minimum this results in a small visual dent in the threads and at worst, if over clamped the thread can be damaged to the point of creating issues running the mating parts. We carefully inspect the parts to make sure this latter issue is avoided. Unfortunately, there is no way to completely avoid grabbing on to the threaded areas for mass production that we have seem, without of-course limiting the amount of thread on each leg.
Location:
Los Angeles, CA, USA
Subscribe to:
Posts (Atom)