Special Concrete Anchors In Steel/Zinc

We a are a long time supplier of special anchors to the construction and OEM sectors in just about every material imaginable.  This is a fairly simple J-bolt anchor made using A307 steel with zinc plating.  It measures 3/8-16 by 12 inches and was manufactured domestically in the USA.  Like most custom fasteners, special anchor parts like this can be supplied on a blanket as-released purchase order basis.

Special Indented Hex Washer Head Thread Forming Screw

Engineered Source supplies a large number of special thread forming screws like this #10-32 X 3.72" unslotted indented hex washer head trilobular screw.  This specific part has been supplied to the same customer for over five years and is sold on a blanket purchase order basis.  It is manufactured in Taiwan using 18-8 stainless steel, passivated and waxed to our customer's specifications.

Special Socket Shoulder Screw In 303 Stainless Steel

Engineered Source is a long time supplier for a number of electronics manufacturers and over the years the number of custom and standard shoulder screws carried has grown exponentially.  This is a special 3/16 X 1-1/2 socket shoulder screw in 303 stainless steel with 8/32 thread sourced from an overseas factory we have worked with for almost a decade.

Special Male/Female Flush Mounting Hardware

Engineered Source supplies countless special stamped parts, from a number of different custom stamped washers to specialized stamped hardware items like these paired male and female flush mounting hardware parts.  They are stamped at a domestic US based factory that we have been working with for over 10 years and supplied on an as-needed blanket purchase order basis.

Special Slotted Fillister Captive Screw

We supply custom made captive screws in both small and large quantities.  This is a special 8-32 X .47 slotted fillister captive screw made using 304 stainless steel.  It is manufactured in the United States and can be supplied to order in as few as 10 pieces.

Special One Way Round Head Tamper Proof Machine Screw

Engineered Source supplies a number of different tamper proof fastener types in a variety of materials, both standard off the shelf parts and special to print fasteners like this one way round head machine screw.  These parts are 4-40 X 1/4 and were manufactured in the United States using 302 stainless steel material.

Special Composite Cork Stamped Parts

We supply our customer based with a wide variety of custom stamped parts, from standard steel/zinc washers to the more odd composite cork stamped parts shown here.  This item is made custom to the customers order at .062 thickness and .63 diameter, and is manufactured in the United States.

Custom Stamped Automotive Brackets

These special stamped parts are provided in small quantities to our long time customer that applies the brackets in their automotive assembly process.  The brackets are made in the USA using ASTM A1008-10CS Type A cold rolled sheet material and depending on the customer needs the lead time can be as short as 1 week.

Special 410 Stainless Steel Fully Threaded Hex Cap Screw

This is an M6 X 1.0 X 60MM hex head cap screw that is fully threaded per customer's specifications and manufactured in the United States using 410 stainless steel.  Parts are then heat treated for required hardness.  A similar part is supplied for the same customer at M5 diameter, which will be shown as a separate entry.  Both parts are supplied on a one-time release basis at 5,000 pieces each.

Special Music Wire Extension Spring

We supply our customer base a number of different custom made compression and extension springs, typically on a blanket as-released purchase order basis.  This special spring part is an extension spring made using pre plated .022 galvanized music wire material.  It is usually supplied to our customer at 5,000 piece increments.