Custom Round Galvanized U-Bolts - 1/2 X 10-1/4 A36 Steel Material HDG

This is another one of our countless custom round galvanized u-bolts made to order using A36 material with hot dip galvanized finish.  It was manufactured domestically in the USA and supplied to our customer as a one time order of 100 pieces.  The custom u-bolt has 1/2 coarse thread at 1-1/2 inches on either leg and 10-1/4 inside depth.  Inside width is measured at 2-1/2 inches.

Custom Coil Compression Springs - Music Wire At .471" Outside Diameter

These are one of the many custom coil compression springs we supply our customer base, made in the USA using music wire with revolving 12 month blanket purchase orders.  The outside diameter measures 0.471 inches, the free length is at 1.391 inches, and the custom springs maintain 9.4 coils.

Custom Phil Flat Machine Screws To Print - 1/4-28 X 13/16 In Steel With Black Oxide Finish

These custom phil flat machine screws are made domestically in the United States using low carbon steel material with black oxide finish and light oil.  We supply them on revolving 12 month blanket purchase orders with other custom hardware items the same customer purchases from us.  Initial lead time for custom machine screws like these is 5-6 weeks from order and drawing approval.

Custom Stainless Aerospace Pins - One Side Chamfered In Stainless Steel Material

These are custom stainless aerospace pins we supply on a production to order basis.  Only one side is chamfered to the customer's requirements and the custom parts are run through passivation prior to shipment.  They measure .310 at the diameter and 3" +/.02 in length.  To the customer's specifications, these custom pins are manufactured in the United States and material certs are available upon request.

Custom Flat HDPE Washers - .625 X .250 X .030 In Polyethylene Material

We supply a number of different custom flat HDPE washers like this .030 thick washer.  This specific .625 X .250 flat washer we supply to our long time customer on a blanket purchase order basis, with a 12 month initial term.  Lead time on a part like this is typically 4-6 weeks from order and drawing approval if applicable.

Custom square galvanized u-bolts made using C1018 steel material

These are custom square galvanized u-bolts we supplied to our customer in Brockport NY at 100 pieces.  They were made using C1018 steel material with hot dip galvanized finish.  1/4 coarse thread was incorporated at 1/2" length on each leg.  Inside width was at 2 inches and inside depth was at 2-1/4 inches.

Custom Stainless Button Head Cap Screws - Partially Threaded

These are custom stainless button head cap screws with partial 8-32 thread made domestically in the United States to the customer's print.  303 stainless steel material was used and the unthreaded shank of the custom screw was made to a diameter of .125".  The 8-32 threaded portion was maintained to a max .225 inches in length.  The button head diameter was maintained within a maximum of .312 inches.

Custom Socket Head Screws With A Drilled Point

These are custom socket head screws with a low profile head measuring .270 X .078 inches, made in the USA using 303 stainless steel material.  The thread incorporated is 8-32 at 7/8" in length, with the remainder of the length as an un-threaded shoulder.  The point on these custom socket bolts has a machined socket drive matching the hex drive on the low profile head.  These unique custom screws were produced in under one week for our customer's urgent needs.

Custom Machined Flat Head Screws In 303 Stainless Steel

These are custom machined flat head screws made domestically in the USA using 303 stainless steel material.  The unique application required the custom screw to have a stop shoulder machined and a 30 degree angle under the head.  10-24 thread was used for the threaded area and the head diameter was maintained at .312" +/-.005.  We supplied just 10 pieces of these custom machined screws for prototype purposes before our customer commits to a larger quantity.

NAS-1352C02-3P Socket Head Cap Screws In Cad Plated Alloy Steel

This is one of the cadmium plated NAS parts we carry on an annual blanket purchase order basis for our customer.  This NAS1352C02-3P socket head cap screw is made domestically and is supplied with material certs and certificate of conformance.  Alloy material per FF-S-86 is used with cad plating in accordance with AMS-QQ-P-416, Type II, Class 2.