1/2-13 X 5-7/8 Custom Round Galvanized U-bolts - With Expedited Service

These 1/2 diameter custom round galvanized u-bolts are one of three sizes we supply our customer in Raleigh NC.  They are made domestically using A307 steel material with a hot dip galvanized finish at 63 pieces.  Our customer was in urgent need and we were able to get these custom u-bolts produced in just 3 days together with the other two sizes.  The inside length measures 5-7/8 while the inside width was set at 3 inches for a pipe radius of 1-1/2 inches.  Two inches of 1/2-13 thread was incorporated on each leg.

Custom Drilled Socket Head Cap Screws In 17-4 PH, AMS 5643 Material

These are custom drilled socket head cap screws we supplied our customer that specializes in aerospace parts repair.  They are made domestically in the USA using 17-4 PH/AMS 5643 material with AMS 2759/3, H1100 (30-37 Rc) heat treat, heavy medium sand blast, and finally passivation.  The socket head is drilled in four places at 60 degrees between each pair, using a #56 drill bit at .0465" diameter.  The length is set at .635-.615 inches and the 8-32 UNJC-3A threaded section is to be maintained at .510 to .490 inches.

Custom Stainless Steel Washers - 304 Stainless Steel Material

These flat custom stainless steel washers are supplied to our long time customer on a revolving blanket purchase order basis.  They are manufactured domestically using 304 stainless steel material and measure .047 +/- .0030" on the thickness, .8720 +/-.0050" on the outside diameter, and .600 +/- .0050" on the inside diameter.  We are extremely competitive on both domestic and import custom flat washers.

1/2-13 X 7-3/4 Custom Round Galvanized U Bolts - Rush Order

These 1/2 diameter custom round galvanized u bolts are one of three sizes we supply our customer in Raleigh NC.  They are made domestically using A307 steel material with a hot dip galvanized finish at just 12 pieces.  Our customer was in urgent need and we were able to get these custom u bolts produced in just 3 days together with the other two sizes.  The inside length measures 7-3/4 while the inside width was set at 5-3/4 for a pipe radius of 2-7/8 inches.  Two inches of 1/2-13 thread was incorporated on each leg.

Custom Rubber Vibration Isolation Mounts With Steel Zinc Pin - 10-24 Thread

These are 10-24 thread version of custom rubber vibration isolation mounts we supply our customer base.  This specific part we supply on a revolving blanket purchase order basis.  The vibration isolation mounts are manufactured domestically in the USA and the initial lead time for first shipment is typically at 45-60 days from order confirmation.

5/8-11 Custom Galvanized Round U Bolts in A36 Steel Material - 5/8 X 10-1/2 Inside Depth

These are custom galvanized round u bolts we supplied a customer in Belleville, New Jersey at just 12 pieces.  A36 material was used with galvanized finish.  Four galvanized hex nuts, two flat washers, and two split lock washers were included with each custom u bolt.  5/8-11 thread was incorporated at 5 inches in length on each leg and the inside width was 8-1/2 inches.  Inside depth was at 10-1/2 inches.  Material certs were provided with the parts per customer's specifications.

Stainless Steel Custom Hex Nuts With A Hole Drilled Through One Corner - 1/4-28 Thread

These are custom hex nuts we supplied to one of our long time aerospace customers, made using 18-8 stainless steel to print with a single drilled corner on each nut.  The parts were domestically made with a lead time of 4-6 weeks for the initial release and incorporated a fine 1/4-28 thread.  In terms of the dimensions, the custom nut was very close to the standard IFI version but the added drilled hole made it uniquely fitting for the specific application.  Our internal part number is 2303-0321T and we originally supplied just 1,500 pcs of this hex nut.

Custom Knurled Shoulder Machine Screws Made To Print - 1/4-20 X 1-1/4 Round Head In Grade 5.1 Zinc Yellow

These are custom knurled shoulder machine screws manufactured domestically in the USA in grade 5.1 steel material with zinc and yellow finish.  Production was run at a relatively small quantity of 4,000 pieces, which was split into two shipments approximately 4 months apart to our OEM customer.  Material certs and dimensional test reports were provided to our customer with the parts, as well as the standard certificate of conformance.  Our internal part number is M111957-2.

7/16-14 Custom Socket Head Cap Screws In 18-8 Stainless Steel Material - 7/16-14 X 6-1/2

These custom socket head cap screws are manufactured domestically at just 3 pieces for a customer in Texas, with a short lead time of just 1 week from confirmed order.  18-8 stainless steel material was used and a partial rolled thread of 7/16-14 was incorporated to the customer's drawing specifications.  Our relationships with factories all over the United States and abroad based on decades of custom hardware & fastener production history, in combination with the flexibility of blanket purchase arrangements, allows us to fully cater to the customer’s hardware specification and procurement requirements.

1/2 Galvanized Round U Bolts - 1/2-13 X 8-1/2 In Galvanized A36 Steel Material

This is one of countless galvanized round u bolts we supply our diverse customer base, supplied with two 1/2-13 galvanized steel hex nuts each.  Typical lead time for this part is 1 week from order for orders up to 300 pieces, and it may expand to 2-3 weeks for the balance on larger orders.  This particular galvanized u bolt measured 8-1/2" on the inside depth and 3-1/2" on the inside width.  The 1/2-13 threaded sections measure approximately 3" on each side.