Custom Partially Knurled Pins In Plain Steel Material - 6-32 Thread On One Side

These are custom partially knurled pins made using plain low carbon steel material.  One side is threaded at 6-32 with approximately .375 inches of thread while the other is diamond knurled at .20 inches max.  Overall length is set at .855 inches.  Production was done domestically at approximately 1,000 pieces.

Custom Grade 8 U Bolts With Rolled Thread - 1/2-13 X 8-1/2" Round U-Bolt in 4140 SAE Grade 8 Material

These are custom grade 8 u bolts made using 4140 SAE grade 8 steel material with rolled 1/2-13 thread.  The hardness was recorded at 36 HRC and tensile strength at 162 KSI.  5 pieces were made for our customer for testing purposes prior to a larger commitment.  The inside width was set at 4.76", inside length at 8.5", and approximately 1.75" of rolled thread was incorporated on both legs.  Material and heat treat certs were provided with the parts per our customer's request.

Custom Socket Shoulder Screws With Thread Locking Nylon Patch - 6-32 X .393" In Grade 2 Material With Phos Finish

These are custom socket shoulder screws made using grade 2 steel material with phos finish and a thread locking patch.  Measuring 6-32 X .393" with a shoulder at .080" and head height at .125" this custom socket shoulder screw is manufactured overseas in increments of 100,000 pieces to be released to our long time customer on an as-needed blanket purchase order basis.  Initial lead time for the first release is typically 120-150 days from order confirmation.  When needed, we can provide a print with dimensions and tolerances for the customer to approve prior to production start.

Rush Order Custom Square U Bolts - 3/8 X 9" In 304 Stainless Steel Material

These are rush order custom square u bolts made domestically using 304 stainless steel material.  We had 50 pieces manufactured for our customer at just 3 days production time to be shipped next day air directly to the job site.  Material certs and a certificate of conformance was provided per our customer's specific instruction.  The inside width was set at 4 inches, inside depth at 9 inches, with approximately 2 inches of 3/8 coarse thread on each leg.

Specialty Round 316 Stainless Steel U Bolts - 1/2-13 X 7-1/4 With 316 Stainless Steel Hex Nuts

These are custom specialty round 316 stainless steel u bolts supplied to our long time customer.   They were manufactured domestically to the customer's drawing in plain 316 stainless steel material, with a lead time of 5 days.  Material certs and a certificate of conformance was provided with the parts per the customer's request.  The inside width is 4-9/16" while the inside length is maintained at 7-1/4".  Approximately 3 inches of 1/2-13 thread was incorporated on each leg.

Custom Stainless Tamper Proof Sheet Metal Screws - 6-18 X 1/2 Oval One Way Type A Sheet Metal Screws In 18-8 Stainless Steel

These are custom stainless tamper proof sheet metal screws measuring 6-18 X 1/2 inch in length.  A tamper resistant one way oval head is incorporated with type A sheet metal screw thread.  We have these parts manufactured domestically at 30,000 to 50,000 pieces and release them to our customer as needed throughout the year.  18-8 stainless steel material is used on these specific one way oval screws but we also supply an identical part in 316 stainless steel material.

Custom Galvanized Square Bent U Bolts - 3/8 X 7" In A36 Galvanized Steel Material

These are custom galvanized square bent u bolts we supplied to our customer at just 10 pieces on a rush basis.  Due to the galvanizing process required the best we could do for these parts was a one week lead time.  If the parts were plain A36 or stainless steel material instead we could reduce the lead time to as fast as 2-3 days of production.  The inside width was set at 5 inches, inside depth at 7 inches, and approximately 3 inches of 3/8 coarse thread was incorporated on each leg.

Custom Round 304 Stainless Steel U-Bolts - 1/2 X 3-1/2 Rush Order

These are custom round 304 stainless steel u-bolts domestically manufactured for our customer at 135 pieces.  This was rush order and we were able to produce the parts within 3 days of order placement.  Material certs and a certificate of conformance was provided with the parts per the customer's specific request.  The inside width was set at 2-1/16 inches, inside depth at 3-1/2 inches, and 1-1/4 inches of 1/2 diameter coarse thread was incorporated on each leg.

Custom Monel 400 Socket Head Cap Screws - 5/8-11 X 3-1/2 With Cut Thread

These are custom Monel 400 socket head cap screws measuring 5/8-11 by 3-1/2" in length.  Domestically produced with a lead time of just 4 days, the 4 pieces we had manufactured incorporated coarse cut thread and a broached socket head drive.  Material certs and a certificate of conformance was provided with the parts per our customer's request.

Custom Grade 5 U Bolts To Print - 9/16 X 3.875 In Grade 5 Steel Zinc Material

These are custom grade 5 u bolts made to our customer's drawing at 500 pieces.  The u-bolts were manufactured domestically in steel zinc material and heat treated to RC20.   9/16-12 rolled thread was incorporated on each leg at 1.625" in length.  The overall inside length was measured at 3.875" and the inside width at 1.565".  Material certs and heat treat certs were provided with the parts per our customer's specific instructions and the overall lead time was 5-6 weeks for the full order.