Custom Chrome Plated Pan Head Screws - 6 X 5/8 Phil Pan Type A Sheet Metal Screws, 316 Stainless Steel With Chrome Finish

We supply a large number of both standard chrome plated screws and tin-cobalt RoHS compliant import chrome plated screws.  The specific screws pictured here are custom chrome plated pan head screws with Type A thread measuring 6 X 5/8.  For fast turnaround they were barrel plated domestically with RoHS compliant chromium, at a lead time of 3-4 weeks.  The plain part itself is custom made to print using 316 stainless steel material, with production taking place domestically within the USA as well.

Custom Fully Threaded U Bolts - Plain Steel Material With 4-40 Thread

These are the more unusual u bolts we have supplied over the years - they are custom fully threaded u bolts.  Typically only a partial length of each leg is threaded, whether cut threads or rolled, but in this case our customer specifically requested a fully threaded version.  1,000 pieces were run through a domestic production process with a lead time of 3-4 weeks.  4-40 thread was incorporated with the inside width at .57 inches and inside length at .75 inches.

Custom Bent Anchor Bolts - 3/16 Diameter in 316 Stainless Steel Material

Pictured here are custom bent anchor bolts made domestically using 316 stainless steel material.  10-24 thread is used on one leg at approximately 7/8" in length.  An 85 degree bend was incorporate per customer's print, with the thread containing leg measuring 1-3/4" and the short leg measuring 1-1/2".  Lead time for smaller quantities (in the hundreds) is 5-7 business days if plain 316 stainless steel material is used.

Custom Chrome Plated Screws - 10-12 X 1 Phil Flat Type A Sheet Metal Screws In 316 Stainless Steel

These are custom chrome plated screws made using the barrel plating process done domestically in the USA.  They are type A sheet metal screws made in 316 stainless steel material specifically to our customer's print.  The overall process to manufacture the screws and to get them barrel chrome plated took approximately 12 weeks.  Depending on the volume involved we can work out the ideal domestic or overseas strategy for any chrome plated parts, both RoHS and non-RoHS compliant.

Custom Captive Stainless Screws - 10-32 X 1.76 In 18-8 Stainless Steel Material

These are custom captive stainless steel screws we supplied to our construction customer, who refers to them as "Gripper Screws".  Production was done domestically in the USA at approximately 5,000 pieces and a lead time of 6-8 weeks.  The multi-step flat head was made using a cold heading process and the 10-32 thread was rolled at 0.2" in length.  The diameter of the unthreaded shoulder was set at 0.14" +/-.015.

Custom 316 Stainless Steel Round U-Bolts - 3/8 X 5 With 3-1/2 Inches of Thread

These are custom 316 stainless steel round u-bolts we supplied to our customer at a bit over 100 pieces.  Lead time was at about 6-7 business days from order and material certs with certificate of conformance were provided with the parts as well per our customer's request.  The inside width is 2-5/8", inside length is 5", and approximately 3-1/2" of thread are incorporated at each leg.  Rush service is available upon request.

Custom L Brackets In Plain Steel Material - 3/4" x 1/2"

These are custom L brackets we provided our long time OEM customer.  We initially had 100 pieces produced for testing and engineering inspection prior to a full commitment for 20,000 estimated annual usage.  Plain low carbon steel material was used and the initial sample lot of 100 pcs was done within 1 week of print confirmation.  The outside dimensions were 3/4 X 1/4 on the narrow side and 1/2 X 1/2 on the wider section, with 1/8" diameter holes drilled 1/2" from the 90 degree angle on each side.

Custom Flat Socket Head Cap Screws - 2-56 X .335/.345 In 18-8 Stainless Steel Material

These are custom flat socket head cap screws manufactured domestically using 18-8 stainless steel material.  The production run was relatively low in quantity at approximately 10,000 pcs, with a standard non-expedited lead time of 6-7 weeks.  Material certs, certificate of conformance, and passivation certs to QQ-P-35 were provided with the parts.

Custom Thin U Bolts - 3/16 X 3 Round U Bolt in 1018 Steel Material

These are custom thin U bolts made domestically using 1018 plain steel material at approximately 600 pcs.  Lead time for production was 6 business days and each custom round u bolt was supplied with a pair of hex nuts, flat washers, and split lock washers.  Material certs and certificate of conformance was provided with the shipment per our customer's request.

Custom Ribbed Neck Carriage Bolts - 1/4-20 X 7/8 In Grade 5 Steel Material With Zinc & Bake

These are custom ribbed neck carriage bolts we supply to one of our oldest customers.  They measure 1/4-20 X 7/8 and are manufactured domestically in the USA in Grade 5 steel material, with zinc and clear finish.  Production lead time is typically approximately 6-7 weeks for this custom part and all certs are available upon request.