Specialty Round 316 Stainless Steel U Bolts - 1/2-13 X 7-1/4 With 316 Stainless Steel Hex Nuts

These are custom specialty round 316 stainless steel u bolts supplied to our long time customer.   They were manufactured domestically to the customer's drawing in plain 316 stainless steel material, with a lead time of 5 days.  Material certs and a certificate of conformance was provided with the parts per the customer's request.  The inside width is 4-9/16" while the inside length is maintained at 7-1/4".  Approximately 3 inches of 1/2-13 thread was incorporated on each leg.

Custom Stainless Tamper Proof Sheet Metal Screws - 6-18 X 1/2 Oval One Way Type A Sheet Metal Screws In 18-8 Stainless Steel

These are custom stainless tamper proof sheet metal screws measuring 6-18 X 1/2 inch in length.  A tamper resistant one way oval head is incorporated with type A sheet metal screw thread.  We have these parts manufactured domestically at 30,000 to 50,000 pieces and release them to our customer as needed throughout the year.  18-8 stainless steel material is used on these specific one way oval screws but we also supply an identical part in 316 stainless steel material.

Custom Galvanized Square Bent U Bolts - 3/8 X 7" In A36 Galvanized Steel Material

These are custom galvanized square bent u bolts we supplied to our customer at just 10 pieces on a rush basis.  Due to the galvanizing process required the best we could do for these parts was a one week lead time.  If the parts were plain A36 or stainless steel material instead we could reduce the lead time to as fast as 2-3 days of production.  The inside width was set at 5 inches, inside depth at 7 inches, and approximately 3 inches of 3/8 coarse thread was incorporated on each leg.

Custom Round 304 Stainless Steel U-Bolts - 1/2 X 3-1/2 Rush Order

These are custom round 304 stainless steel u-bolts domestically manufactured for our customer at 135 pieces.  This was rush order and we were able to produce the parts within 3 days of order placement.  Material certs and a certificate of conformance was provided with the parts per the customer's specific request.  The inside width was set at 2-1/16 inches, inside depth at 3-1/2 inches, and 1-1/4 inches of 1/2 diameter coarse thread was incorporated on each leg.

Custom Monel 400 Socket Head Cap Screws - 5/8-11 X 3-1/2 With Cut Thread

These are custom Monel 400 socket head cap screws measuring 5/8-11 by 3-1/2" in length.  Domestically produced with a lead time of just 4 days, the 4 pieces we had manufactured incorporated coarse cut thread and a broached socket head drive.  Material certs and a certificate of conformance was provided with the parts per our customer's request.

Custom Grade 5 U Bolts To Print - 9/16 X 3.875 In Grade 5 Steel Zinc Material

These are custom grade 5 u bolts made to our customer's drawing at 500 pieces.  The u-bolts were manufactured domestically in steel zinc material and heat treated to RC20.   9/16-12 rolled thread was incorporated on each leg at 1.625" in length.  The overall inside length was measured at 3.875" and the inside width at 1.565".  Material certs and heat treat certs were provided with the parts per our customer's specific instructions and the overall lead time was 5-6 weeks for the full order.

Custom Button Head Socket Screws With Half Dog Point - 5/16-24 X 1" In 18-8 Stainless Steel Material

These are custom button head socket screws with half dog point used in an aerospace assembly application by our long time customer.  18-8 material is used to domestically manufacture these parts and the half dog point measures .225-.235 diameter by .150-.170 inches in length.  The screw itself measures 5/16-24 X 1" and we had these produced at a small quantity of just 25 pieces with rush service at 2 weeks lead time.  Material certs, inspection report, and certificate of conformance was provided with the parts per our aerospace customer's specifications.

Custom Round 304 Stainless Steel U Bolts - 3/8 X 17-7/8 With Material Certs

These are custom round 304 stainless steel u bolts with extra long threaded section to allow our customer to cut them down as needed for a variety of different applications.  This allowed him to get better pricing on a larger quantity and still service a different length requirements.  The inside width is measured at 1/2" and the inside depth is at 8-1/2 inches.  Each leg has approximately 7-1/4 inches of coarse thread.  Material certs were provided with the parts per our customer's request.

Specialty Stainless Steel U-bolts - 1/2 X 8 U Bolts To Print In 304 Stainless Steel Material

These specialty stainless steel u-bolts were manufactured domestically at 60 pieces using plain 304 stainless steel material.  The 1/2-13 thread was incorporated at 1-1/4 inches on both sides with the thread cut, as opposed to rolled.  Unless the customer specifically requests rolled thread we typically always use the cut thread as the default option.  The inside depth measured 3 inches and the inside width is 2-1/16".  A rush fee was paid by the customer to get the custom u-bolts completed within 2 days from order.

Custom Combo Drive Machine Screws - 10-32 X 3/8 Phil/Slot Pan Head M/S In Steel Zinc

These are custom combo drive machine screws measuring 10-32 X 3/8.  They are manufactured domestically using steel zinc material with production runs typically at 200,000 to 250,000.  We stock and release this part to our long time OEM customer with revolving annual blanket purchase orders.