Custom Long Compression Springs In 17-7PH Material - 30.331 Overall Length

The production of these custom long compression springs in 17-7PH material was run at a relatively small batch of only 25 pieces.  17-7PH material was used per AMS 5678 and all production work was done domestically with all secondary processes done with NADCAP certified facilities.  A first article inspection report (FAIR) was provided as well with the parts together with all other certs.  .060 +/-.0015" diameter wire was used to make this part and the ID/OD was set to .78"/.90".  Parts were passivated per AMS 2700, method 1, type 2 or 8 with full certs to complete the production process spanning approximately 7-8 weeks from start.

Custom 17-7PH Compression Springs - 0.125 X 1.016 Compression Springs For Aerospace Applications

These custom 17-7PH compression springs were manufactured domestically and are intended for aerospace manufacturing applications.  17-7 PH Stainless steel material per AMS 5678 was used and the parts were passivated per MIL-S-5002.  Heat treat was specificed per MIL-H-6875 and we also had to run the springs 100% through penetrant inspection in accordinace with MIL-STD-6866 Type I, Method A, Sensitivity Level 2.  Outside diameter measured .800 inches, inside diameter at .53 inches, and 3-1/2 total coils.  First Article Inspection Report (FAIR) was provided with the first batch of these compression springs per customer requirements.

Custom Stainless Steel Compression Springs - 302 Stainless Steel Material Per AMS 5640

These are custom stainless steel compression springs we supply our aerospace customer, in 302 stainless steel material to AMS 5640.  The initial production run was relatively small at just 500 pieces, completed domestically with First Article Inspection Report (FAIR) and all applicable certifications.  The freestanding length of the custom spring was set at 2.472 inches +/- .010 and the outside diameter of the coil is set at .261 +/- .005 inches.

Custom Stainless Steel Compression Springs - .240 X .032 X 1

These are custom stainless steel compression springs we supply to our customer on an as-needed basis at approximately 20,000 pieces per order.  The lead time is typically 4-6 weeks for full production.  The stainless steel wire used is .032 in thickness and the total static length of the springs is 1 inch.