Custom Long Compression Springs In 17-7PH Material - 30.331 Overall Length

The production of these custom long compression springs in 17-7PH material was run at a relatively small batch of only 25 pieces.  17-7PH material was used per AMS 5678 and all production work was done domestically with all secondary processes done with NADCAP certified facilities.  A first article inspection report (FAIR) was provided as well with the parts together with all other certs.  .060 +/-.0015" diameter wire was used to make this part and the ID/OD was set to .78"/.90".  Parts were passivated per AMS 2700, method 1, type 2 or 8 with full certs to complete the production process spanning approximately 7-8 weeks from start.

Custom Aerospace Compression Springs - 17-7PH Stainless Steel Material

We supply these custom aerospace compression springs to our aerospace components manufacturing customer.  17-7PH stainless steel material is used for the domestic production of these parts, per AMS 5673-F.  Our production runs are typically in the smaller 500 piece quantity range for this specific spring, with lead time at 8-10 weeks.  That lead time includes passivation per AMS QQ-P-35, and penetrant inspection per ASTM E 1417 Type I, Method A, Sensitivity L-3.  Each one of those two processes typically takes about 1 week to complete.