Special M3 X 0.5 X 10MM Socket Cap Screw in C276 Hastelloy Material

Engineered Source is your one-stop shop for hastelloy special fasteners, for both small and large quantities, with lead times for smaller quantities as low as 3 weeks.  This specific part is a M3 X 10MM socket cap screw made using C276 Hastelloy material, manufactured in the United States to an order of just 12 pieces.

Special Socket Shoulder Screw to Print: 1/8 X 3/8 in 303 Stainless Steel, 4-40 Thread

This is a special socket shoulder screw made to our customer's prints that we supply over the course of the year on as-needed basis.  Manufactured in the United States, this part is made using 303 stainless steel with a shoulder measuring 1/8 X 3/8 inches and thread at 4-40.  Standard lead time for this part is 6-8 weeks upon placement of purchase order.

Special to Print M8 X 1.25 X 45MM 6-Lobe Modified Flat Head Machine Screw

This is a special metric modified flat head machine screw manufactured in the USA, made using straight hardened steel with black oxide finish.  Measuring M8 X 1.25 X 45MM, this machine screw has a 6-lobe drive.  Custom parts to print like this machine screw can be provided on as-released or as-ordered basis to the customer's specifications.

1/4 X 3/8 Special Alloy Dowel Pin to Print

Special dowel pins made to print are one of the more common items supplied by Engineered Source, as manufacturers in all industries at one point or another come across a need for a custom pin.  Whether you are looking for alloy, stainless steel, PTFE, hastalloy, or one of the less common materials, we are happy to supply the pin to your specifications and needs.  This specific dowel pin is made using standard alloy material, with both sides chamfered, and has a diameter of 1/4".

3/8" Neoprene 70A Grade Strips at 2.5" X 3ft Each

While Engineered Source is focused on being a supplier and distributor of special and standard fasteners, we are nevertheless extremely diverse in the related products offered to our customers.  These special 3/8" neoprene strips made to our customer's specific dimensional requirements are a perfect example.  Like most parts supplied by Engineered Source, items like this can be provided in a number of rubber material types and a seemingly endless variety of sizes and customization.

Special 1/6 X .850 Hastalloy Sensor Pin

Custom pins of virtually all types, materials, and specific requirements are Engineered Source's specialty.  We work closely with our international and domestic factories to supply special pins like this 1/16 X .850 Hastalloy Sensor Probe Pin, chamfered only on one side.  This specific part is distributed to our customer on an "As Released" blanket order basis, allowing for greater flexibility based on manufacturing and financial metrics.

PTFE Blue Coated Threaded ASTM A193 Grade B7 Studs & Heavy Hex ASTM A194 Grade 2H Nuts

Engineered Source is your supplier for PTFE coated fastener needs in the Orange County, Los Angeles, and Southern California region as a whole.  Various types of coatings are available - Xylan 1000 series, 1400 series, 142X series, Teflon, Ceramic, Mil-Spec Coatings, Halar, and Dry Film Lubricants.  The right coating selection is based on environmental considerations for the parts, such as presence of different degrees of moisture, heat, chemicals, etc.  These particular parts included B7 studs measuring 3/4-10 X 3-3/4 with accompanying 3/4-10 Grade 2H heavy hex nuts.

Special Phillips Shoulder Screw to Print - 1/8 X 1/4 With 4/40 Thread

This is a special shoulder screw to print we have supplying for a number of years, manufactured in the United States using 304 stainless steel and distributed to the customer on as needed release basis with a blanket purchase arrangement.  Lead time for an item like this based on a quantity of approximately 10,000 pieces is 8-12 weeks, with significantly shorter lead time available for a small quantity run using one of our specialty small quantity manufacturing partners.

Special DFAR Compliant MS20822-4J Machined Elbow Fitting

Engineered Source has been supplying custom machined fasteners and related products since inception, creating a strong network of quality manufacturers that have consistently proven their value in quality and timely delivery.  DFAR compliant fittings like this MS20822-4J are a common item we distribute, with any specific certifications requested by the customer.

Special machined sleeve manufactured to print - DFAR compliant & Passivated

Engineered Source is your source for hot headed, cold headed, and machined special fasteners to print like this machined sleeve.  Virtually any special material, certification, or part specific requirements can be incorporated into the process and we can assist you with your special fastener request even when small quantities are involved.  This specific part was manufactured using 304 stainless steel, passivated, and run through a water immersion test for 24 hours.  Made in USA, this special sleeve is DFAR compliant and original order quantity was for 50 pieces.