Special NAS9921C5B20F & NAS9921C5B19F Shear Bolts

As you can see in the print below, which continues for another 4 pages of specifications, these shear bolts are a tough part to make.  5/16-24 thread pitch is used for the threaded section, with a thread locking patch.  A286 material is used to make the part, with heat treat and passivation per AMS 2700.  We supplied the customer 6 pieces of each part, made specifically for their order and specifications.

Custom 5/16 X 7-1/2 Square U Bolt In 304 Stainless Steel

This is a square U bolt in 304 stainless steel that we supplied to a customer at just 32 pieces.  The 2 inches of thread on either side are 5/16-18 coarse thread and the inside depth of the part is 7-1/2 inches, while the inside diameter is at 6-1/16 inches.  Also a rush project, these parts were completed within 3 days as well from order.

Custom 5/16 Diameter 304 Stainless Steel U-bolt

Custom U bolts are a daily routine for us and this is a 5/16-18 threaded U bolt we supplied a customer, made in the USA using 304 stainless steel material with plain finish.  It measures 4-5/16 inches on the inside width and 5-1/2 inches on the inside depth.  The customer was in a big rush and we were able to get the parts made and shipped within 3 days from order.  Material certs were provided as well per our customer's request.

Custom Metric Button Socket Cap Screw In 302 Stainless Steel

This is a special to print custom button head cap screw we supply a long time customer on an annual basis at approximately 5,000 pieces - it measures M3 X 0.5 X 7.24MM.  They are supplied in increments of 5,000 pieces and are made in the United States using 302 stainless steel material with passivation as the final stage in the process.  Fine thread and a special to print point is incorporated in these parts, which resembles an oval point on a standard set screw.

Special Made DIN912 M12 X 1.5 X 70MM Socket Cap Screw

We supply countless metric fasteners to our customer base and often due to availability or additional customer specific requirements we have a number of alloy socket cap screws special made to order.  This DIN912 M12 X 1.5 X 70MM is a perfect example.  We provide this socket screw to our customer on an as-released blanket purchase order basis and typically stock a 6 month supply at any one time.  It is made in the USA in 12.9 alloy steel material with plain and light oil finish.

Custom 1/72 Hex Machine Screw Nut Made to Print

This is a special to print part we sell to an aerospace customer on an as-released purchase order basis, with the releases at approximately 600 pieces.  Made in the USA, this 1/72 machine screw nut is DFAR compliant and was made using 303 stainless steel with 3B thread fit.  Typically lead time from order is approximately 4 weeks.

Special Dimensional MS16218-9 Slotted Flat Machine Screw

Customers often ask us to supply them dimensional equivalents of MS and AN milspec parts with a varying degree of documentation and testing requirements.  This is a small quantity (1,000 pieces) batch of special made dimensional equivalent of MS16218-9 slotted flat machine screws, made in the USA using C65500 ASTM B 98 silicon bronze material - it measures 2-56 X 3/16".

Special Threaded Studs in 316 Stainless Steel

Special threaded rod products like these custom cut 3/4 X 9 threaded studs in 316 stainless steel are a daily routine for us.  We supply our diverse customer base a large variety of custom made u bolts, custom made square u bolts, bent threaded anchor bolts, etc.  A number of different raw material choices are at your disposal and countless more specialized materials available upon request at slightly longer lead times.

Custom Molded Glass Filled Nylon T-Pin

We supply our diverse customer base a variety of special molded and injection molded parts like this custom nylon molded part that we supply in quantities of 2,000-5,000 pieces, on a annual blanket order basis.  This specific molded part is made using Nylon 6/6 material that is 33% glass filled to allow for optimal break points our customer requires.

AN126288 Straight Stud Special Made for Aerospace Application

This is a dual threaded straight stud made to AN126288 specifications, with one side at 5/16-24 thread pitch and the other at 5/16-18 non standard pitch.  We supplied this part to our aerospace customer at approximately 300 pieces per order.  AMS 6322 steel was used as the material, heat treated to 26-32 rockwell hardness and Cadmium plated to AMS 2400 specification.  Material, heat treat, and plating certs were provided with the parts.