Custom Large HDG U-Bolts - 1-8" X 23-3/8 In A36 Steel Material, Galvanized Finish

Jose, aka "Chef", is holding up two custom large HDG U-bolts we had produced for our custom in Rock Hill, South Carolina.  Time was of the essence and we were able to ship the parts within approx 7 business days of order with 4 galvanized heavy hex nuts per u-bolt.  1" diameter A36 material was used, with 4.75" of coarse thread on each leg.  Inside width measured at 19.5" and inside length at 23.375".

Custom Slotted Flat Copper Machine Screws - 4/40 x 5/16 in 110 Copper Material

These custom slotted flat copper machine screws are one of multiple sizes we have supplied our customer over the years.  They are custom made each time as ordered due to relatively small usage and are typically shipped within 2-3 weeks of order.  This specific 4/40 X 5/16 version was produced domestically at 1,100 pcs under our internal part number MSF-0405-Z.  Material certs are made available upon request and expedited processing is typically available, depending on raw material availability.

Custom J-Bolts - 1/2 X 10-3/4 In A36 Plain Steel Material

Custom J-Bolts made domestically using A36 material without any finish.  Our customer needed just 18 pieces urgently and we were able to get them made and shipped within 4 days of order.  1/2 inch bar stock was used with 1-1/4" inside width on the J-turn and 1-3/4" on the short leg.

Custom Knurled Hardware - Test Knurling Samples For Custom 41L40 Steel Plate Bolts

Over the years we have provided countless custom knurled hardware pieces - below is a snapshot of a custom bolt we are working on producing for a customer that is intended to be hammered into a predrilled steel plate.  We noticed that the spec calls out for diamond knurling but realized that probably won't work for the intended purpose, which is to keep the bolt from spinning after being inserted.

Custom Aerospace Socket Screws - NA0069A040046 Socket Head Cap Screws in 1250 MPA A286 Material

These are custom aerospace socket screws we had domestically produced for our aerospace customer at 50 pieces.  The trickiest part was the 1250 MPA requirement that our customer insisted on, which is a deviation from the standard NA0069A040046 specification.  We were able to supply the custom part faster than our original promise date at approximately 3 weeks from order receipt.  M4-0.7 thread was incorporated and test results confirmed 39-40 HRC after AMS 2759/3 Rev. F heat treat process.  NADCAP certified passivation per AMS-2700 was also performed and all certifications were provided to our customer with the parts.

Custom Eye Bolts - 5/16 X 1-3/8 Stainless Steel Custom Eye Bolt With Coarse Thread

These are custom eye bolts we supplied in 304 stainless steel material, with nuts and washers per our customers requirements.  5/16" coarse thread and bar stock was used and the parts were bent to create a 1-3/8" inside eye diameter and approximately 1" of thread.  Material certs were made available to the customer with the parts and the lead time to produce 75 pieces was approximately 7 business days.

Custom Unique Thread Pitch Screws - 3/8-20 X 1-1/4 Socket Head Cap Screws in 18-8 Stainless Steel Material

These custom unique thread pitch screws were one of the stranger projects that we came across - it was the first time in over 20 years that someone requested a 3/8-20 thread pitch.  We had the custom screws manufactured domestically at just 40 pieces using 18-8 stainless steel material.  The lead time was at approximately 3 weeks from order confirmation.

Custom 4140 Steel Shoulder Bolts - M11.5 X 136MM With Special Hex Head, 37-44 RC, Special Dog Point

These are custom 4140 steel shoulder bolts we supplied to our automotive customer at 100 pieces.  4140 steel material was used with heat treat to achieve 37-44 RC, with plain finish.  The shoulder measured M11.5 x 136MM with a 1.15MM groove approximately 35MM from the special hex head.  The special dog point measures 10.447MM/10.540MM by 5.7MM in length.  Lead time for this 100 piece domestic batch was approximately 6 weeks from order confirmation.

Alloy Steel Set Screws With Nylon Strip - DIN913 M6 X 1M X 16MM Socket Set Screw With Flat Point

We supply countless parts with a variety of different thread locking patches, thread locking pellets, and thread locking strip applications like these alloy steel set screws with nylon strip.  These thread locking features provide for a vast variation in applications we can accommodate.  We can typically provide samples to allow our customer to test different types, lengths, and combinations prior to committing to a full production volume.

Small Custom Plain Steel U-Bolts - 5/16-18 X 1.38" With Rolled Thread

This is one of our small custom plain steel u-bolts made domestically to our customer's drawing and tolerances.  Only 20 pieces were required and 5/16-18 rolled thread was requested with a .06 X 45 degree chamfer requested and undersized first two threads.  The center to center dimension was set at .81", inside length at 1.38" and thread length at .62".  Lead time was approximately 4-5 weeks since the customer was not in a rush to get the parts sooner.  Faster lead time was available in needed.