Custom Cross Drilled Thumb Screws - M10-1.25 X 25MM-30MM

These sweet custom cross drilled thumb screws were produced domestically using low carbon steel material with plain finish.  Two different sizes were produced: M10-1.25 X 25MM and M10-1.25 X 30MM.  The head on both sizes measured 15MM in diameter and in height.  The cross drilled holes have a diameter of 6MM with a slight chamfer at each opening.  Typically a thumb screw like this would have knurling around the head but our customer decided to forgo that feature.

Custom Button Flange Socket Cap Screws - 8-32 X .50 In Grade 2 Steel With Nylon Patch

These custom button flange socket cap screws were produced using grade 2 steel material with black oxide finish and nylon patch thread locking feature.  Full 8-32 thread was incorporated and the flange diameter was set at .357" +/-.005".  Head height including the flange was to be at .087" +/-.005" and a 3/32 socket drive was cold headed during the production process.  The blue nylon patch was applied over 180 degrees of the covered threaded section.

Custom Black Painted Screws - Stainless Steel #6 X 1/2" Type A Sheet Metal Screws

We supply these custom black painted screws to our architectural element design and build customer in Los Angeles.  They are 18-8 stainless steel type A sheet metal screws measuring #6-18 X 1/2" that are then stripped of any wax to prepare for the painting process.  The black paint is formulated to match our customer's samples and a satin sheen is incorporated to match that of the paneling they will be used on.  We typically run batches of 30,000 pcs of this specific color and screw, with lead time ranging from 3-5 weeks from initial order confirmation.

Custom Steel T-Bolts With Zinc Clear Finish - 8-32 X 3/4

These custom steel T-bolts were manufactured domestically using medium carbon steel material with zinc clear finish.  8-32 thread was incorporated at a length of 3/4" underneath the head.  The head height is set to .04", head width across the flats at .32", and the width across the rounded sides at .438" +/-.015" max.  Lead time for mass production of a similar part is typically 8-10 weeks from order confirmation.

Custom 17-7PH Springs - C Shaped Aerospace Spring Clips

We supply these tricky custom 17-7PH springs to our aerospace customer - unlike the other compression and extension 17-7PH springs we supply the same customer, these are C shaped with two .165" length oval openings. The material thickness was set to .020" and the outside diameter at .550-.555". The angle between the ends was the more challenging part, set at 130 +/-5 degrees. The oval openings incorporated a full radius on both sides and the width was limited to .062" max. A FAIR and material certs were provided with the parts.

Custom Modified Button Socket Screws - 18-8 Stainless Steel Material

These custom modified button socket screws were made using standard off the shelf M3 X 0.5MM button socket cap screws.  The COTS version was modified to an overall length of 7.24MM, inclusive of the head height. The dog point prior to the radius start was set at a length of .015" and diameter of .090".  At the end of that dog point section the radius was machined at R 0.075.  Lead time for a similar modified part is typically 3-4 weeks from the attainment of the COTS version.

Custom Painted Sheet Metal Screws - 18-8 Stainless Steel Material

These are 6 X 1/2 custom painted sheet metal screws that we had painted for our architectural design customer to match their custom paneling.  The darker color on the left is mixed to match the RAL 1019 brown while the lighter color on the right is formulated to match RAL 1015.  Both color screws were finished with satin sheen clear coat to create the more matte finish desired by our customer and required by their finish samples provided.  We typically run parts like this in bulk quantities and the lead time for the paint process is 3-4 weeks.

Custom Black Aluminum Spacers - 5.3MM X 80MM In 6061-T6 Aluminum Material

We had these custom black aluminum spacers manufactured for an automotive research facility using 6061-T6 aluminum material with black anodize finish.  The inside diameter measures 5.3MM and the outside diameter 13MM.  The overall length is 80MM and tolerance on all dimensions is +/- .10MM.  Production was done domestically with a relatively quick turnaround time of 4 weeks including the anodizing process.

Custom Silicon Bronze Slotted Machine Screws - 1/4-20 X 3/4 Slotted Fillister

These custom silicon bronze slotted machine screws were manufactured domestically with a fillister head diameter of 0.5".  2,000 pieces in total were produced using C65500 half hard siliconze bronze material.  Head height was set at .110 +/- .005" and the thread length underneath the head was set at .75 +/- .01".  1/4-20 thread was incorporated and the slot width was .055 +/- .01".

Custom Slotted Machine Screws For An Architectural Application

These custom slotted machine screws were made at a smaller 150 piece quantity for our architectural design customer.  They were made domestically using 18-8 stainless steel material with a relatively fast turnaround time of 2 weeks from order.  We replicated a sample part provided by our customer in the absence of a drawing.  1/4-20 thread pitch was incorporated with the thread length at 1-1/2 inches.  Our internal part number for this part is STS-1524-I.