Custom Slotted Round Metric Screws - M7 X 1.0 X 34.5MM In Mild Steel With Black Oxide

These custom slotted round metric screws were manufactured using a cold heading process mild steel material, finished with a black oxide treatment. 90-92 degree angle was incorporated underneath the head, which had an outside diameter of 13.37MM-13.80MM and overall height of 5.15MM max inclusive of the undercut portion. Full M7 X 1.0M thread was rolled to a 6G thread fit. The slotted drive was designed to 1.81MM-2.06MM width and depth of 2.5MM at minimum. Our internal part number for this custom metric machine screw is MMSO-07035-F.

Custom Cone Point Screws - 8-32 Slotted Machine Screw In 18-8 Stainless Steel

These custom cone point screws were manufactured using 304 stainless steel material with plain finish.  8-32 fine thread was incorporated with the overall length of the threaded portion and the cone point set at .2925"-.3125".  The head diameter was .306"-.322" and slot depth at .045"-.058".  Head height was set at .085"-.096".  Production was completed at just over 13,000 pieces within 8 weeks from order.

Custom Long 316 Stainless Steel Screws - 8-32 X 3 Socket Head Cap Screws

These are custom long 316 stainless steel screws at 8-32 X 3 in dimensions, manufactured domestically at a small batch of approximately 40 pieces.  The parts were completed in a relatively quick turnaround time-frame of approximately 4 weeks from order, especially considering the holiday timing.  To allow for the small quantity and speed the hex socket drive was broached instead of using a cold headed approach.  You can see evidence of this at the inside of the recess drive where you would see machining marks instead of the typical clean concave interior seen in cold headed parts.  The partial thread was also cut rather than rolled to allow for the short production run option.

Custom 316 Stainless Steel Socket Head Screws

These are custom 316 stainless steel socket head cap screws at 10-32 X 1/2 and 10-32 X 3/8 in dimensions, manufactured domestically at a small batch of approximately 100 pieces.  The parts were completed in a relatively quick turnaround time-frame of approximately 4 weeks from order, especially considering the holiday timing.  To allow for the small quantity and speed the hex socket drive was broached instead of using a cold headed approach.  You can see evidence of this at the inside of the recess drive where you would see machining marks instead of the typical clean concave interior seen in cold headed parts.

Custom Stainless Binding Posts - Painted & In Black Oxide

These custom stainless binding posts were manufactured domestically to our customer's drawing using 18-8 stainless steel material.  8-32 female thread is incorporated with the shoulder diameter at .250" and shoulder length at .250" as well.  The dome head was made to a diameter of .406" and head height of .060".  For the final application we provided this part with both custom painted heads to match the color and also with black oxide finish.

Custom Nickel Plated Socket Head Screws - 4340 Material

These custom nickel plated socket head screws were produced domestically using 4340 material instead of the originally requested 17-4PH version, with heat treatment to get the parts up to required 35-45 HRC hardness.  1/2-20 thread with 2A thread fit was incorporated with thread length of .77 inches.  Overall length underneath the head was set at 1.37" +.00/-.03".  The large .945" diameter head presented a challenge from the start for the cold heading operation - it took multiple sets of tooling and adjustments to finally get the head shape just right.

Custom Captive Shoulder Screws - Flat Socket Head In 302HQ DFARS Material

Slightly over 4,000 pieces of these custom captive shoulder screws were made domestically for our aerospace customer.  An MS24671-32 part made using 302HQ DFARS compliant material was used as a base part to create this final version.  Part of the 1/4-20 3A thread was turned down to a shoulder diameter of .175" +/-.005 and length of .339" +/- .015.  .375" of thread remained after the modification.  The resulting captive shoulder screws were then passivated per AMS QQ-P-35 and run through a thread lock patch process per MIL-F-18240.

Custom Flat Socket Head Screws - 302 Stainless Steel Material

These custom flat socket head screws were manufactured domestically at 20,000 pieces in the 1.695" overall length and the same quantity in 1.29" overall length.  302 stainless steel material was used with plain passivated finish.  Head diameter was .375" and head height at .097", with a 90 degree countersunk base.  Partial thread of .75" was rolled for both length variations.  Material certs and certificate of conformance was provided with the parts.

Custom Large Anchor Bolts - F1554 Grade 36 Material, Galvanized

These custom large anchor bolts were manufactured domestically using F1554 grade 36 material for the threaded anchors, F436 material for the washers, and A563 material for the nuts.  All parts were 2" in diameter with coarse thread, with galvanized finish.  The large anchor bolts measured 6 feet in overal length and each was provided with 5 heavy hex nuts and 3 washers.  Production was done with an expedited rush option to be completed within 7 business days.  Material certs were provided with the parts.

Custom Modified Grade 8 Machine Screws - Special Head Shape

These custom modified grade 8 machine screws were made using 5/16-18 X 1-1/4 Grade 8 hex head cap screws in grade 8 steel material with zinc/clear finish.  The head of each COTS part was machined to the shape seen here, with the head height at .190" +/-.005" and head diameter at .485" +/-.005".  Single flat .42" section was incorporated at one section per our customer's provided sample piece.  Total of 300 pieces were modified on this specific production run and the lead time was approximately 2 weeks from the order receipt.