Stainless Steel Custom Hex Nuts With A Hole Drilled Through One Corner - 1/4-28 Thread

These are custom hex nuts we supplied to one of our long time aerospace customers, made using 18-8 stainless steel to print with a single drilled corner on each nut.  The parts were domestically made with a lead time of 4-6 weeks for the initial release and incorporated a fine 1/4-28 thread.  In terms of the dimensions, the custom nut was very close to the standard IFI version but the added drilled hole made it uniquely fitting for the specific application.  Our internal part number is 2303-0321T and we originally supplied just 1,500 pcs of this hex nut.

Custom Knurled Shoulder Machine Screws Made To Print - 1/4-20 X 1-1/4 Round Head In Grade 5.1 Zinc Yellow

These are custom knurled shoulder machine screws manufactured domestically in the USA in grade 5.1 steel material with zinc and yellow finish.  Production was run at a relatively small quantity of 4,000 pieces, which was split into two shipments approximately 4 months apart to our OEM customer.  Material certs and dimensional test reports were provided to our customer with the parts, as well as the standard certificate of conformance.  Our internal part number is M111957-2.

7/16-14 Custom Socket Head Cap Screws In 18-8 Stainless Steel Material - 7/16-14 X 6-1/2

These custom socket head cap screws are manufactured domestically at just 3 pieces for a customer in Texas, with a short lead time of just 1 week from confirmed order.  18-8 stainless steel material was used and a partial rolled thread of 7/16-14 was incorporated to the customer's drawing specifications.  Our relationships with factories all over the United States and abroad based on decades of custom hardware & fastener production history, in combination with the flexibility of blanket purchase arrangements, allows us to fully cater to the customer’s hardware specification and procurement requirements.

1/2 Galvanized Round U Bolts - 1/2-13 X 8-1/2 In Galvanized A36 Steel Material

This is one of countless galvanized round u bolts we supply our diverse customer base, supplied with two 1/2-13 galvanized steel hex nuts each.  Typical lead time for this part is 1 week from order for orders up to 300 pieces, and it may expand to 2-3 weeks for the balance on larger orders.  This particular galvanized u bolt measured 8-1/2" on the inside depth and 3-1/2" on the inside width.  The 1/2-13 threaded sections measure approximately 3" on each side.

Custom Stainless Steel Threaded Studs - 6-32 X 7/8 In 18-8 Stainless Steel Material

These custom stainless steel threaded studs were supplied to our custom at just 550 pieces with a lead time of 1-2 weeks from confirmed order.  The threaded studs were manufactured domestically using 18-8 stainless steel material with passivation to complete the production process.  They measure 6-32 X 7/8" and the internal part number is FTS-006014-I.

3/8 X 10" Custom Square U Bolts In 304 Stainless Steel Material

These are part of a small batch of 25 custom square u bolts we supplied to a power laboratory.  Type 304 stainless steel material was used and 3/8-16 thread was incorporated at approximately 3 inches in length on each leg.  The inside width was 4 inches and inside depth at 10 inches.  The parts were completed and shipped within 5 days of order confirmation, with material certs per our customer's specifications.

Precision Custom Stainless Steel Dowel Pins - .1160 X .625 Made to Customer's Drawing

This is a small batch of custom stainless steel dowel pins manufactured domestically in the USA at just 36 pieces.  303 stainless steel was used and the custom dowel pins measure .1160 at the diameter by .625 inches in length.  The diameter was the most critical dimension with a tolerance of +/-.0001".  Both sides were chamfered at .010 X 45 degrees and +/-.005 tolerance was called for on the length.  We were able to get production completed and parts shipped in less than 2 weeks from order confirmation.

Custom Square U Bolts - Made Using 304 Stainless Steel With 1/2-13 Thread

These are 1/2 diameter custom square u bolts we supplied to a construction company in urgent need, at small quantity of just 6 pieces.  With a rush service we were able to ship these custom parts within 4 days from order confirmation.  They incorporate approximately 4 inches of 1/2-13 thread, with the inside width at 4-1/2 inches and inside depth at 18 inches.  Material certs and stainless steel hex nuts were supplied as well per the customer's request.  Our internal part number for these custom square u bolts is USB050288-I.

Custom Oversized U-bolts - 1" Diameter X 48" Length In A36 Galvanized Steel Material

These are some of the larger custom oversized u-bolts we have supplied.  1" diameter A36 steel material was used, hot dip galvanized, with approximately 4 inches of coarse thread.  Inside width was 46 inches and the inside length was maintained at 48 inches.  Our customer was in a big rush and we were able to get these two large custom u-bolts done in just 3 days.  A pair of galvanized hex nuts and washers was included with each u-bolt.

Nylon Pellet Set Screws For Aerospace Applications - 8-32 X 1/2 Socket Set Screw With Cup Point in 18-8 Stainless Steel

These are specialty nylon pellet set screws we supply our long time aerospace customer on scheduled release blanket purchase order basis.  The cup point set screws are made in the USA using 18-8 stainless steel material and are then run through the nylon pellet secondary operation.  Our customer using approximately 500 pieces every six months and the lead time to prepare the initial shipment for these nylon pellet set screws is typically 1-2 weeks from order. Our internal part number is SSC-0808-INPELL.