These custom precision machined weld studs were manufactured in mild carbon steel material with eventual copper flash plating prior to use on the production floor. Overall length of the weld stud is 20.02mm and the single projection measures .75mm diameter by .80mm length. UNC-2B thread was rolled on the threaded section and samples were manufactured for our customer to test prior to full production.
Search Our Custom Fasteners
Tuesday, April 23, 2024
Custom Precision Machined Weld Studs
Labels:
custom copper flash weld studs,
custom weld studs,
precision steel weld stud factories,
projection weld stud manufacturers,
threaded weld stud manufacturers
Location:
Alabama, USA
Tuesday, March 19, 2024
Custom Stainless Steel Chamfered Dowel Pins
These custom stainless steel dowel pins were manufactured in lengths ranging from 2-1/2" to 9" and a diameter of 1/8". 304 stainless steel material was used and the pins were factory passivated after the chamfer was applied on each side.
Labels:
custom stainless dowel pins,
precision steel dowel pin manufacturers,
stainless dowel pin factories,
stainless dowel pin manufacturer
Location:
Minnesota, USA
Monday, February 5, 2024
Custom Cl 10.9 Torx Drive Socket Head Bolts
Labels:
6lobe drive screw manufacturers,
custom class 10.9 screw factories,
custom torx drive bolts,
custom torx drive screws,
torx drive socket head bolt manufacturers
Location:
Chicago, IL, USA
Thursday, January 11, 2024
Custom Metric Stainless Steel Standoffs
These custom metric stainless steel standoffs were manufactured using 303 stainless steel material with M3 X 0.5 tapped to a depth of 8MM on one side and unthreaded drilled hole on the other side at a diameter of 4.2MM and a depth of 10MM. The flat machined sections were set to 7MM across the flats and the round outside section was at a radius of 8MM. Full certs were provided with the parts.
Labels:
custom machined electronics standoffs,
custom stainless standoffs,
custom threaded standoffs,
stainless female standoff manufacturers,
stainless round standoff factories
Location:
Chicago, IL, USA
Tuesday, January 9, 2024
Custom Low Profile Socket Head Screws in Stainless Steel
These custom low profile socket head screws were manufactured using 304 stainless steel material for our gun product manufacturing customer and were also provided with black oxide finish. Full 10-32 thread was rolled at a length of .75" below the cold forged head. Parts were provided with full certs per our customer's requirements.
Labels:
custom low profile screws,
custom low profile stainless bolt factories,
low head screw manufacturers,
low profile bolt manufacturers
Location:
Miami, FL, USA
Wednesday, November 22, 2023
Custom 316 Stainless Left Hand Jam Nuts
These custom domestic left hand 1/2-20 thread jam nuts were manufactured in the USA using DFARS compliant 316 stainless steel material to AN316C8L requirements. The hex nuts were passivated per AMS QQ-P-35 with our NADCAP certified facility and proof load tested per FF-N-836E. Full certs were provided with the parts per customer requirements.
Labels:
custom 316 stainless jam nuts,
custom aerospace jam nut manufacturers,
custom domestic hex nuts,
custom left hand hex nuts,
custom left hand jam nut manufacturers
Location:
Chicago, IL, USA
Friday, November 10, 2023
Custom Stainless Steel Metric Male-Female Standoffs
These custom metric male/female standoffs were manufactured using 303 stainless steel material with commercial passivation. M5 thread was tapped to a depth of 8MM and the male extension was machined without thread to a diameter of 3.8MM and length of 3MM. The distance across the flats used for wrenching during the application was set to 7MM.
Labels:
custom stainless spacers,
custom stainless standoffs,
male female standoff factories,
stainless male female standoff manufacturers,
stainless steel spacer manufacturers
Location:
Minneapolis, MN, USA
Monday, November 6, 2023
Custom Metric Hex Key Double Thread Studs
These custom metric hex key double thread studs were manufactured domestically for our automotive customer using alloy steel material meeting 220,000 psi clamp load minimum. M12 thread was rolled on both sides, with fine pitch on the longer side and coarse on the other. 1/4" hex drive was formed on one side extending .25" from the fine threaded section. Full certs were provided with the parts.
Labels:
automotive thread stud factories,
automotive thread stud manufacturers,
custom alloy steel double thread studs,
custom automotive threaded studs,
custom hex key double thread studs
Location:
Atlanta, GA, USA
Tuesday, October 31, 2023
Custom Grade 5 Dacromet Coated Sheet Metal Screws
These custom Grade 5 #12 X 1-3/4" type AB sheet metal screws were manufactured to SAE J429 specifications with 25-34 core hardness, 120 KSI min tensile strength, and 92 KSI min yield strength. Dacromet zinc flake coating was applied to complete the parts and a raised dot was incorporated to help our construction customer easily distinguish between these Grade 5 screws and the standard low carbon version also in use.
Labels:
custom grade 5 sheet metal screws,
dacromet coated screw manufacturers,
grade 5 sheet metal screw manufacturers,
grade 5 thread forming screw manufacturers,
pan head sheet metal screw factories
Location:
Chicago, IL, USA
Wednesday, October 25, 2023
Custom Domestic Automotive Class 9.8 Hex Flange Bolts
These custom class 9.8 hex flange bolts were manufactured for our automotive customer in the USA. M6-1.00 X 18MM thread was rolled and head dimensions were made to DIN 6921 specifications. Parts were heat treated to 28-37 HRC core hardness per ISO 898-1 Class 9.8. Level 3 PPAP and full certs were provided with the parts per customer requirements.
Labels:
custom class 9.8 automotive bolt factories,
custom domestic flange bolts,
domestic hex flange bolt factories,
domestic hex flange bolt manufacturers
Location:
Chicago, IL, USA
Subscribe to:
Posts (Atom)