Custom Made 316 Stainless Steel Round U-Bolts - 1/2-13 X 2-1/2

These are custom made 316 stainless steel round u-bolts made domestically at 100 pieces with a lead time of 2 weeks from confirmed order.  The inside width was set at .94" and inside depth at 2-1/2".  1.38 inches of coarse thread was incorporated on both legs.  Material certs and our C of C is available upon request - our internal part number is UB050040-J.

Custom Stainless Steel Shoulder Bolts - 1/8 X 1-1/2 Shoulder

These are custom stainless steel shoulder bolts made domestically in the USA using 18-8 stainless steel material.  We typically run production at approximately 10,000 pcs per order for our customer and the lead time ranges between 5 and 6 weeks from confirmed order.  The shoulder measures 1/8 X 1-1/2, with 4-40 thread.

Custom Galvanized Steel Round U-Bolts - 3/8 X 11-5/8

These are custom galvanized steel round u-bolts made domestically using A36 galvanized steel material.  We supplied them at 200 pieces per order with a lead time of 2-3 weeks from confirmed order.  3/8 diameter bar was used and the inside width was set at 2-5/8", inside depth at 4-3/4", and approximately 2-5/8" of coarse thread was incorporated on each side.

Custom Metric Invar 36 Screws - M3-.5M X 10MM Socket Head Cap Screws

These are custom metric Invar 36 screws that we supply the University of Montreal in Canada at approximately 50 pieces per order.  They are manufactured domestically in the United States with a lead time of 2 weeks and are provided with all required certifications.

Custom Stainless Steel Compression Springs - .240 X .032 X 1

These are custom stainless steel compression springs we supply to our customer on an as-needed basis at approximately 20,000 pieces per order.  The lead time is typically 4-6 weeks for full production.  The stainless steel wire used is .032 in thickness and the total static length of the springs is 1 inch.

Custom Metric Dowel Pins - M8 X 35MM In Alloy Steel With One Side Tapped With M4 X 0.7M Thread

These are custom metric dowel pins we supply to our long time electronics OEM customer.  They are made using alloy steel at M8 X 35MM and are tapped on one side each for M4 X 0.7M thread.  The thread depth is set at 3MM and the other side is left untouched.  These custom dowel pins are manufactured domestically with a lead time of 6-8 weeks.

Custom Square Steel U Bolts - 5/8 X 12-11/16 In CD-C1018 Steel Material With No Finish

We supplied these 5/8 diameter custom square steel u bolts to our customer at just 2 pieces for prototype purposes.  Since plain C1018 steel was used for the production the lead time was just 3-4 days, which would typically be closer to 2 weeks if hot dip galvanizing or plating process was involved.  The inside width measured 14-5/8, inside depth was at 12-11/16, and approximately 4 inches of coarse thread was incorporated on each leg.

Custom Poly Coated U Bolts - 3/8 X 11-1/2 Round U Bolts In 18-8 Stainless Steel Material

These are one of the custom poly coated u bolts we supply our customer in Cleveland OH.  It is made using 18-8 stainless steel material with poly coat for protection against vibration, heat, UV rays, uneven surfaces, and other adverse environmental conditions.  The lead time from order confirmation was approximately 3 weeks.  The inside width, including the poly coat material, was at 4-9/16", while the inside depth was set at 11-1/2.  Coarse 3/8 diameter thread was incorporated at 2 inches on each leg.  Our internal part number is CUB037184-I.

Custom Washers In 18-8 Stainless Steel Material

These are custom washers in 18-8 stainless steel, manufactured domestically at just under 4,000 pieces.  The lead time was approximately 6 weeks from order confirmation.  Inside width on the washer is .340" to .350" and the outside width is .466" to .500".  Plain 18-8 stainless steel material was used and our internal part number is WA-340466057-I.

Custom Narrow Round U Bolts In Stainless Steel Material - 3/8 X 6-1/2 In 18-8 Stainless

These custom narrow round u bolts were supplied to our customer at 25 pieces with a lead time of just one week.  3/8 diameter 18-8 stainless steel material was used with 2 inches of coarse thread on each leg.  The inside width is 1/2" and inside depth at 6-1/2".  Faster delivery was available with an additional expedite fee option.  Our internal part number is UB037104-I.

Tin Cobalt Plated 316 Stainless Sheet Metal Screws - 10-12 X 1 Type A SMS

These are 316 stainless custom type A sheet metal screws with tin-cobalt RoHS compliant chrome plate finish, with the 316 stainless steel designated by a dot on the head of each screw.  Like the other custom tin cobalt chrome plated screws, these 10-12 X 1 type A phil flat sheet metal screws are manufactured overseas and supplied to our long time customer on a revolving blanket purchase order basis.  The tin cobalt chrome plating is done in a barrel plate format for improved cost efficiency while still producing a very attractive cosmetic finish.  Tin cobalt finish typically provides a slightly duller chrome finish than the traditional hexavalent chromium plating.  All the custom tin cobalt plated parts we supply are electroplated with a bright nickel under-plate for improved longevity and appearance.

Custom Hex Washer Head Trilobular Screws - 10/32 X 1/2 Unslotted Thread Forming Screws in 410 Stainless Steel

We supply our customer base a large number of different thread forming screws like these custom hex washer head trilobular screws manufactured overseas in Taiwan.  They measure 10/32 X 1/2 and are made using 410 stainless steel with heat treat for additional hardness and passivation to complete the production process.  Production is typically run at 100,000 pieces and we supply it to our long time OEM customer using 12 month blanket purchase orders.

Custom Shoulder Pins In Grade 2 Steel With Zinc Finish - 5/16 X 13/16 Shoulder

These are custom shoulder pins made using grade 2 steel material with zinc finish, manufactured overseas in Taiwan at approximately 100,000 pieces.  We supply them to our long time OEM customer on revolving 12 month blanket purchase orders, delivering parts as they need them.  The shoulder was maintained at 5/16 X 13/16".  Lead time for the initial lead time was 120-150 days, which is fairly typical for overseas parts with ocean freight.

Custom Stainless Steel Socket Cap Screws In 303 Stainless Steel - 8-32 X 4-1/2"

These are custom stainless steel socket cap screws made domestically using 303 stainless steel at just 102 pieces.  We supply this part to our long time aerospace customer approximately once a year with full paperwork.  It measures 8-32 X 4-1/2 and had a relatively short lead time of 1 week for production.  Our internal part number is SC-008068-I.

Custom 304 Stainless Steel Square U Bolts - 3/8 X 9" With Material Certs

These are custom type 304 stainless steel square u bolts we supplied to our customer at 73 pieces.  Since no outside plating or coating services were required these u bolts were completed within 1 week of confirmed order and were shipped with material certs per the customer's specification.  The inside width is 4" and the inside depth is at 9".  Two inches of coarse thread was incorporated at each leg.

Custom Type A Sheet Metal Screws With Tin Cobalt Chrome Finish - 6-18 X 3/8" In 316 Stainless Steel Material

These are 316 stainless custom type A sheet metal screws with tin-cobalt RoHS compliant chrome plate finish, with the 316 stainless steel designated by a dot on the head of each screw.  Like the other custom tin cobalt chrome plated screws, these 6-18 X 3/8 phil flat sheet metal screws are manufactured overseas and supplied to our long time customer on a revolving blanket purchase order basis.  The tin cobalt chrome plating is done in a barrel plate format for improved cost efficiency while still producing a very attractive cosmetic finish.  Tin cobalt finish typically provides a slightly duller chrome finish than the traditional hexavalent chromium plating.  All the custom tin cobalt plated parts we supply are electroplated with a bright nickel under-plate for improved longevity and appearance.

Custom Square Galvanized U-Bolts - 1/2" X 7" In A36 Galvanized Steel Material

These are custom square galvanized u-bolts manufactured domestically at 100 pieces using A36 steel material, hot dipped galvanized.  The inside depth is at 7" and inside width maintained at 5-1/2".  1-1/4 inches of coarse thread is incorporated at each leg.  Lead time for these 100 pieces was at 7-8 business days but it could be shorter with an expedite option.

Chrome Plated 316 Stainless Sheet Metal Screws - #12-11 X 1-1/4 Type A Sheet Metal Screws With Tin Cobalt Chrome Plating

These are custom chrome plated 316 stainless sheet metal screws with tin-cobalt RoHS compliant chrome plate finish, with the 316 stainless steel designated by a dot on the head of each screw.  Like the other custom tin cobalt chrome plated screws, these type A 12-11 X 1-1/4 phil pan sheet metal screws are manufactured overseas and supplied to our long time customer on a revolving blanket purchase order basis.  The tin cobalt chrome plating is done in a barrel plate format for improved cost efficiency while still producing a very attractive cosmetic finish.  Tin cobalt finish typically provides a slightly duller chrome finish than the traditional hexavalent chromium plating.  All the custom tin cobalt plated parts we supply are electroplated with a bright nickel under-plate for improved longevity and appearance.

Custom 316 Stainless Steel Truss Head Sheet Metal Screws With Tin Cobalt Chrome Plate - #10-12 X 3/4 Phillips Truss Type A SMS

These are custom 316 stainless steel truss head sheet metal screws with tin-cobalt RoHS compliant chrome plate finish, with the 316 stainless steel designated by a dot on the head of each screw.  Like the other custom tin cobalt chrome plated screws, these type A 10-12 X 3/4 phil pan sheet metal screws are manufactured overseas and supplied to our long time customer on a revolving blanket purchase order basis.  The tin cobalt chrome plating is done in a barrel plate format for improved cost efficiency while still producing a very attractive cosmetic finish.  Tin cobalt finish typically provides a slightly duller chrome finish than the traditional hexavalent chromium plating.  All the custom tin cobalt plated parts we supply are electroplated with a bright nickel under-plate for improved longevity and appearance.

Custom Ultra Fine Threaded Studs In 18-8 Stainless Steel - 5/16-32 X 1-1/4 Chamfered On Both Sides

We supplied these custom ultra fine threaded studs to our customer in the civil engineering and construction field.  They measure 5/16-32 X 1-1/4 and are manufactured domestically with a lead time of 1-2 weeks.  100 pieces were produced with each side chamfered by hand.  Unlike the typical threaded studs used in construction, these ultra fine thread parts were very temperamental and required extra care during the production process and handling.  Even the smallest error in the chamfering process or a small dent in the thread from handling/shipping could ruin the thread run and cause jamming on the mating parts.

Custom Miniature Metric U Bolts - M4 X 0.7M X 15.23MM In A36 Steel Material

These are custom miniature metric u bolts we supplied to our customer at just five pieces for testing purposes before a larger production volume order is placed.  The inside width was maintained at 16MM and the straight portion of each leg was to be set at 15.34MM.  On the metric u bolts with similar inside width, this M4 diameter is typically the smallest we are able to work with.

Custom 316 Stainless Sheet Metal Screws With Tin Cobalt Chrome Plating - 6-18 X 5/8" Type A SMS

These are custom 316 stainless steel sheet metal screws with tin-cobalt RoHS compliant chrome plate finish, with the 316 stainless steel designated by a dot on the head of each screw.  Like the other custom tin cobalt chrome plated screws, these type A 6 X 5/8 phil pan sheet metal screws are manufactured overseas and supplied to our long time customer on a revolving blanket purchase order basis.  The tin cobalt chrome plating is done in a barrel plate format for improved cost efficiency while still producing a very attractive cosmetic finish.  Tin cobalt finish typically provides a slightly duller chrome finish than the traditional hexavalent chromium plating.  All the custom tin cobalt plated parts we supply are electroplated with a bright nickel under-plate for improved longevity and appearance.

Custom Assembled Galvanized U Bolts - 1/2 X 5" With Custom Plates & Nuts

These are round custom assembled galvanized u bolts made using A36 steel material with hot dipped galvanized finish, made domestically at 1,000 pieces.  Custom 5/16 X 1-1/2 X 4-1/2 galvanized steel plates were produced to fit the u-bolts.  Per our customer's specifications we delivered the 1,000 sets fully assembled with the plate and two washers per u-bolt set.  The u bolts were made with an inside width at 2-3/4" and an inside depth of 5".  Three inches of coarse thread were incorporated on each leg.  Our internal part number is AUB050080-N.

Custom Metric Threaded Studs - M30 X 3.5M X 338MM In ANSI 1008 Material Plain

These are custom metric threaded studs we supplied a customer in Orange County at 200 pieces.  They were manufactured domestically with a lead time of 2-3 weeks, made using ANSI 1008 material with material certs and chemical composition specs included.  ASME B1.13M-2005 M30X3.5M thread was required and the overall length for each stud was maintained at 338MM.  Our internal part number for this threaded stud is ATR-M30X35X388MM.

3/8 Diameter Custom Stainless Steel U Bolts - 3/8-16 X 4-1/2 In Type 304 Stainless Steel Material

These are round 18-8 stainless steel 3/8 diameter custom stainless steel u bolts we supplied to our customer in Naples FL.  The inside width was set at 1/2" and the inside depth was 4-1/2".  2 inches of standard coarse thread was incorporated to the customer's requirements.  Our internal part number is UB037072-I and the lead time for these parts was at 5 business days from order confirmation.

Custom 316 Stainless Steel Threaded Studs Cut & Chamfered - 3/4-10 X 11-1/2

These are custom 316 stainless steel threaded rods cut and chamfered to 11-1/2 lengths.  We supplied this specific order at just 36 pieces with 3/4-10 thread.  Material certs were supplied with the parts per the customer's request and the lead time was at just 3-4 days from the initial order.  Our internal part number for these custom 316 stainless steel studs is ATR-075C11.5-J.