Custom Slotted Reverse Drive Machine Screws - 1/4-20 X 1" In Zinc Plated Steel Material

These are custom slotted reverse drive machine screws made domestically in the USA using low carbon steel material with commercial zinc and clear finish.  Approximately 12,000 pcs were produced with a lead time of 8-10 weeks.  The heads were cold headed and the slotting was done as the last stage in the process prior to zinc plating.  Material certs and certificate of conformance was made available to the customer as needed.

Custom Dog Point Screws - 10/24 X 5/8 Socket Head Cap Screws In 18-8 Stainless Steel With Half Dog Point

We have been supplying our long time OEM customer with these custom modified parts for many years.  They are 18-8 stainless steel socket head cap screws with a half dog point.  Flatness of the point is most critical to our customer's application and the process had to be refined over the first few years to get it absolutely right.  The half dog point dimensions are based on ASME B18.3-2003.

Custom Automotive Flat Socket Machine Screw - 1/4-28 X 1/2 In Grade 5 Steel Material With Thread Lock Patch & Level III PPAP

These are custom automotive flat socket machine screws we supply our aftermarket automotive OEM customer.  Parts are manufactured domestically with production runs of 5,000 pcs and lead time of approximately 8-10 weeks.  Cold headed 5/32 hex drive is incorporated with fully threaded 1/4-28 body and 60 degree countersink angle.  3/32 of hex key engagement is required and nylon thread lock patch is added to finalize the parts.  Level III PPAP was provided to the customer with the parts.

Custom Large 316 Stainless U-bolts - 1/2 X 18" Round Custom U-bolts With 4 Hex Nuts Each

These are custom large 316 stainless u-bolts we supplied our customer in San Diego.  They specialize in waterworks related construction and specifically needed 316 stainless steel material with a fast turnaround.  We were able to ship the parts within 4 days of order confirmation.  1/2" diameter bar stock was used with 2 inches of coarse thread on each leg, with inside width measuring 16.25" and inside length at 18".

Custom Stainless Steel Studs - 3/4 X 6 Inch 316 Stainless Steel Threaded Studs

These are one of many custom stainless steel studs we supply our recurring customers. This specific order of 3/4" X 6" threaded studs in 316 stainless steel consisted of 42 pieces.  Off the shelf 6 foot 316 stainless steel threaded rod was cut and chamfered on both sides - production took 4 days from receipt of order.

Custom Bent Anchor Bolts - 1/2 X 5" Bent Concrete Anchor Bolts in A449 Plain Steel Material

One of the custom bent anchor bolts we have supplied to our construction customer at 12 pieces in April.  Plain A449 material was used and the parts were ready to ship within 6 business days from order.  1/2 bar material was used and approximately 2 inches of coarse thread was incorporated on each leg.  One leg was set at 3" and the other at 5" overall length from the inside of the bend.  Faster lead time was made available with an expedite option.

Custom Large HDG U-Bolts - 1-8" X 23-3/8 In A36 Steel Material, Galvanized Finish

Jose, aka "Chef", is holding up two custom large HDG U-bolts we had produced for our custom in Rock Hill, South Carolina.  Time was of the essence and we were able to ship the parts within approx 7 business days of order with 4 galvanized heavy hex nuts per u-bolt.  1" diameter A36 material was used, with 4.75" of coarse thread on each leg.  Inside width measured at 19.5" and inside length at 23.375".

Custom Slotted Flat Copper Machine Screws - 4/40 x 5/16 in 110 Copper Material

These custom slotted flat copper machine screws are one of multiple sizes we have supplied our customer over the years.  They are custom made each time as ordered due to relatively small usage and are typically shipped within 2-3 weeks of order.  This specific 4/40 X 5/16 version was produced domestically at 1,100 pcs under our internal part number MSF-0405-Z.  Material certs are made available upon request and expedited processing is typically available, depending on raw material availability.

Custom J-Bolts - 1/2 X 10-3/4 In A36 Plain Steel Material

Custom J-Bolts made domestically using A36 material without any finish.  Our customer needed just 18 pieces urgently and we were able to get them made and shipped within 4 days of order.  1/2 inch bar stock was used with 1-1/4" inside width on the J-turn and 1-3/4" on the short leg.

Custom Knurled Hardware - Test Knurling Samples For Custom 41L40 Steel Plate Bolts

Over the years we have provided countless custom knurled hardware pieces - below is a snapshot of a custom bolt we are working on producing for a customer that is intended to be hammered into a predrilled steel plate.  We noticed that the spec calls out for diamond knurling but realized that probably won't work for the intended purpose, which is to keep the bolt from spinning after being inserted.