Custom Stainless Steel Compression Springs - .240 X .032 X 1

These are custom stainless steel compression springs we supply to our customer on an as-needed basis at approximately 20,000 pieces per order.  The lead time is typically 4-6 weeks for full production.  The stainless steel wire used is .032 in thickness and the total static length of the springs is 1 inch.

Custom Metric Dowel Pins - M8 X 35MM In Alloy Steel With One Side Tapped With M4 X 0.7M Thread

These are custom metric dowel pins we supply to our long time electronics OEM customer.  They are made using alloy steel at M8 X 35MM and are tapped on one side each for M4 X 0.7M thread.  The thread depth is set at 3MM and the other side is left untouched.  These custom dowel pins are manufactured domestically with a lead time of 6-8 weeks.

Custom Square Steel U Bolts - 5/8 X 12-11/16 In CD-C1018 Steel Material With No Finish

We supplied these 5/8 diameter custom square steel u bolts to our customer at just 2 pieces for prototype purposes.  Since plain C1018 steel was used for the production the lead time was just 3-4 days, which would typically be closer to 2 weeks if hot dip galvanizing or plating process was involved.  The inside width measured 14-5/8, inside depth was at 12-11/16, and approximately 4 inches of coarse thread was incorporated on each leg.

Custom Poly Coated U Bolts - 3/8 X 11-1/2 Round U Bolts In 18-8 Stainless Steel Material

These are one of the custom poly coated u bolts we supply our customer in Cleveland OH.  It is made using 18-8 stainless steel material with poly coat for protection against vibration, heat, UV rays, uneven surfaces, and other adverse environmental conditions.  The lead time from order confirmation was approximately 3 weeks.  The inside width, including the poly coat material, was at 4-9/16", while the inside depth was set at 11-1/2.  Coarse 3/8 diameter thread was incorporated at 2 inches on each leg.  Our internal part number is CUB037184-I.

Custom Washers In 18-8 Stainless Steel Material

These are custom washers in 18-8 stainless steel, manufactured domestically at just under 4,000 pieces.  The lead time was approximately 6 weeks from order confirmation.  Inside width on the washer is .340" to .350" and the outside width is .466" to .500".  Plain 18-8 stainless steel material was used and our internal part number is WA-340466057-I.

Custom Narrow Round U Bolts In Stainless Steel Material - 3/8 X 6-1/2 In 18-8 Stainless

These custom narrow round u bolts were supplied to our customer at 25 pieces with a lead time of just one week.  3/8 diameter 18-8 stainless steel material was used with 2 inches of coarse thread on each leg.  The inside width is 1/2" and inside depth at 6-1/2".  Faster delivery was available with an additional expedite fee option.  Our internal part number is UB037104-I.

Tin Cobalt Plated 316 Stainless Sheet Metal Screws - 10-12 X 1 Type A SMS

These are 316 stainless custom type A sheet metal screws with tin-cobalt RoHS compliant chrome plate finish, with the 316 stainless steel designated by a dot on the head of each screw.  Like the other custom tin cobalt chrome plated screws, these 10-12 X 1 type A phil flat sheet metal screws are manufactured overseas and supplied to our long time customer on a revolving blanket purchase order basis.  The tin cobalt chrome plating is done in a barrel plate format for improved cost efficiency while still producing a very attractive cosmetic finish.  Tin cobalt finish typically provides a slightly duller chrome finish than the traditional hexavalent chromium plating.  All the custom tin cobalt plated parts we supply are electroplated with a bright nickel under-plate for improved longevity and appearance.

Custom Hex Washer Head Trilobular Screws - 10/32 X 1/2 Unslotted Thread Forming Screws in 410 Stainless Steel

We supply our customer base a large number of different thread forming screws like these custom hex washer head trilobular screws manufactured overseas in Taiwan.  They measure 10/32 X 1/2 and are made using 410 stainless steel with heat treat for additional hardness and passivation to complete the production process.  Production is typically run at 100,000 pieces and we supply it to our long time OEM customer using 12 month blanket purchase orders.

Custom Shoulder Pins In Grade 2 Steel With Zinc Finish - 5/16 X 13/16 Shoulder

These are custom shoulder pins made using grade 2 steel material with zinc finish, manufactured overseas in Taiwan at approximately 100,000 pieces.  We supply them to our long time OEM customer on revolving 12 month blanket purchase orders, delivering parts as they need them.  The shoulder was maintained at 5/16 X 13/16".  Lead time for the initial lead time was 120-150 days, which is fairly typical for overseas parts with ocean freight.

Custom Stainless Steel Socket Cap Screws In 303 Stainless Steel - 8-32 X 4-1/2"

These are custom stainless steel socket cap screws made domestically using 303 stainless steel at just 102 pieces.  We supply this part to our long time aerospace customer approximately once a year with full paperwork.  It measures 8-32 X 4-1/2 and had a relatively short lead time of 1 week for production.  Our internal part number is SC-008068-I.