Search Our Custom Fasteners
Tuesday, October 31, 2017
Custom Metric Button Socket Screws In 18-8 Stainless Steel Material - M3 X 0.5 X 7.24MM
These are custom metric button socket screws we supply to our long time customer in 18-8 stainless steel material. It is an M3 X 0.5 X 7.24MM button socket head cap screw with a 2MM hex socket drive at 1.04" minimum depth. Production lead time is typically between 6 and 8 weeks, done domestically and supplied with material certs and certificate of conformance. Our internal part number is 110319.
Labels:
custom button socket screws,
custom metric screws,
custom stainless screws,
stainless button socket screws
Location:
Los Angeles, CA, USA
Monday, October 30, 2017
Custom Stainless Steel Compression Springs - 302 Stainless Steel Material Per AMS 5640
These are custom stainless steel compression springs we supply our aerospace customer, in 302 stainless steel material to AMS 5640. The initial production run was relatively small at just 500 pieces, completed domestically with First Article Inspection Report (FAIR) and all applicable certifications. The freestanding length of the custom spring was set at 2.472 inches +/- .010 and the outside diameter of the coil is set at .261 +/- .005 inches.
Location:
Gardena, CA, USA
Monday, October 23, 2017
Custom Zinc Plated U-Bolts - 3/8 X 4-1/2 Round U Bolts In A36 Zinc Plated Steel Material
These are custom zinc plated u-bolts in A36 steel material with commercial zinc and clear finish. Domestic production was run for 200 pieces on a rush basis with lead time at 7-10 business days due to the zinc plating process time required. 3/8 diameter rod was used with 2-1/2 inches of coarse thread on each leg. The inside depth was set at 4-1/2 inches, inside width at 2-1/2 inches, and material certs were provided with the parts per our customer's request.
Labels:
custom steel u bolts,
custom zinc plated u bolts,
round zinc plated u bolts,
zinc plated u-bolts
Location:
Chicago, IL, USA
Tuesday, October 17, 2017
Blue Coated Aerospace Hardware - 1/4" Shoulder Screw In Alloy Steel With Alumazite KL-55 Blue Coating
This is an example of blue coated aerospace hardware we supply, with a 1/4 diameter shoulder screw in alloy steel coated with Alumazite KL-55 blue finish. The blue coating was intended to allow an robotic color coded system to recognize the screw and yet maintain its integrity in environments up to 600 degrees F. The coating is also intended to limit any risk of off-gassing and usability of the hex socket drive. Only the head is coated to avoid the complications of having any coating on the shoulder and threaded surfaces.
Labels:
blue aerospace hardware,
blue coated fasteners,
color coated aerospace hardware,
color coated hardware
Monday, October 9, 2017
Custom Zinc Plated U Bolts - 5/16 X 3-1/2 With Plates & Hex Nuts
These are custom zinc plated u bolts we supplied to our customer at 150 sets that included 2 hex nuts per u bolt and a flat plate measuring 1/8 X 2 X 3-1/4 inches. The lead time without any rush service was at 2 weeks from order confirmation. Material certs were provided with the parts per customer specifications. The inside width of the u bolt was set at 2 inches, inside length at 3-1/2, and 2 inches of 5/16 coarse thread was incorporated on each leg. The sets were delivered to the customer fully assembled as shown in the picture.
Location:
San Diego, CA, USA
Custom Black Nylon Washers - Flat Nylon Washers Dyed Black .187/.500/.040
These are custom black nylon washers that we supply to one of our oldest customers on a recurring blanket purchase order basis. Average annual volume it approximately 800,000 pieces and we typically maintain at least a 6 month supply on hand at all times. Actual production time required is typically 6-7 weeks from order and the flat washers measure .187 inches on the inside diameter, .500 inches on the outside diameter, and .040 inches on the thickness.
Location:
Tijuana, Baja California, Mexico
Friday, October 6, 2017
Large Custom Double Sided Studs - Grade 8 1-1/4 X 52 Inch Overall Length
These are large custom double sides studs made using grade 8 steel material at 1-1/4 diameter and 52 inches overall length. Each side had 6 inches of thread and a grade 8 nylon insert zinc yellow lock nut. Production for 8 pieces took approximately 1 week. Material certs were made available to our customer upon request.
Location:
Crete, IL 60417, USA
Custom Partially Knurled Pins In Plain Steel Material - 6-32 Thread On One Side
These are custom partially knurled pins made using plain low carbon steel material. One side is threaded at 6-32 with approximately .375 inches of thread while the other is diamond knurled at .20 inches max. Overall length is set at .855 inches. Production was done domestically at approximately 1,000 pieces.
Location:
Inglewood, CA, USA
Wednesday, September 20, 2017
Custom Grade 8 U Bolts With Rolled Thread - 1/2-13 X 8-1/2" Round U-Bolt in 4140 SAE Grade 8 Material
These are custom grade 8 u bolts made using 4140 SAE grade 8 steel material with rolled 1/2-13 thread. The hardness was recorded at 36 HRC and tensile strength at 162 KSI. 5 pieces were made for our customer for testing purposes prior to a larger commitment. The inside width was set at 4.76", inside length at 8.5", and approximately 1.75" of rolled thread was incorporated on both legs. Material and heat treat certs were provided with the parts per our customer's request.
Labels:
custom grade 8 u bolts,
custom round grade 8 u-bolts,
grade 8 u bolts,
specialty grade 8 u bolts
Location:
Johnson City, TN, USA
Monday, September 18, 2017
Custom Socket Shoulder Screws With Thread Locking Nylon Patch - 6-32 X .393" In Grade 2 Material With Phos Finish
These are custom socket shoulder screws made using grade 2 steel material with phos finish and a thread locking patch. Measuring 6-32 X .393" with a shoulder at .080" and head height at .125" this custom socket shoulder screw is manufactured overseas in increments of 100,000 pieces to be released to our long time customer on an as-needed blanket purchase order basis. Initial lead time for the first release is typically 120-150 days from order confirmation. When needed, we can provide a print with dimensions and tolerances for the customer to approve prior to production start.
Labels:
custom shoulder screws,
custom socket screws,
custom socket shoulder screws,
steel socket screws
Location:
Tijuana, Baja California, Mexico
Subscribe to:
Posts (Atom)