Custom Flat Socket Head Cap Screws - 2-56 X .335/.345 In 18-8 Stainless Steel Material

These are custom flat socket head cap screws manufactured domestically using 18-8 stainless steel material.  The production run was relatively low in quantity at approximately 10,000 pcs, with a standard non-expedited lead time of 6-7 weeks.  Material certs, certificate of conformance, and passivation certs to QQ-P-35 were provided with the parts.

Custom Thin U Bolts - 3/16 X 3 Round U Bolt in 1018 Steel Material

These are custom thin U bolts made domestically using 1018 plain steel material at approximately 600 pcs.  Lead time for production was 6 business days and each custom round u bolt was supplied with a pair of hex nuts, flat washers, and split lock washers.  Material certs and certificate of conformance was provided with the shipment per our customer's request.

Custom Ribbed Neck Carriage Bolts - 1/4-20 X 7/8 In Grade 5 Steel Material With Zinc & Bake

These are custom ribbed neck carriage bolts we supply to one of our oldest customers.  They measure 1/4-20 X 7/8 and are manufactured domestically in the USA in Grade 5 steel material, with zinc and clear finish.  Production lead time is typically approximately 6-7 weeks for this custom part and all certs are available upon request.

USA Galvanized U Bolts - 1/2 X 5-1/4" In A307 USA Melt Steel Material, HDG

These are custom USA galvanized u bolts manufactured domestically using US melt steel.  Our customer ordered this 1/2 X 5-1/4" together with 5 other size variations.  Rush lead time was approximately 8-10 business days due to the galvanizing process.  This specific version has an inside width of 3-5/8", 1/2-13 thread of approximately 1-1/2 inches on each leg, and inside length of 5-1/4".  Material certs and a C of C was provided with the parts per our customer's requirements.

Custom Metric Button Socket Screws In 18-8 Stainless Steel Material - M3 X 0.5 X 7.24MM

These are custom metric button socket screws we supply to our long time customer in 18-8 stainless steel material.  It is an M3 X 0.5 X 7.24MM button socket head cap screw with a 2MM hex socket drive at 1.04" minimum depth.  Production lead time is typically between 6 and 8 weeks, done domestically and supplied with material certs and certificate of conformance.  Our internal part number is 110319.

Custom Stainless Steel Compression Springs - 302 Stainless Steel Material Per AMS 5640

These are custom stainless steel compression springs we supply our aerospace customer, in 302 stainless steel material to AMS 5640.  The initial production run was relatively small at just 500 pieces, completed domestically with First Article Inspection Report (FAIR) and all applicable certifications.  The freestanding length of the custom spring was set at 2.472 inches +/- .010 and the outside diameter of the coil is set at .261 +/- .005 inches.

Custom Zinc Plated U-Bolts - 3/8 X 4-1/2 Round U Bolts In A36 Zinc Plated Steel Material

These are custom zinc plated u-bolts in A36 steel material with commercial zinc and clear finish.  Domestic production was run for 200 pieces on a rush basis with lead time at 7-10 business days due to the zinc plating process time required.  3/8 diameter rod was used with 2-1/2 inches of coarse thread on each leg.  The inside depth was set at 4-1/2 inches, inside width at 2-1/2 inches, and material certs were provided with the parts per our customer's request.

Blue Coated Aerospace Hardware - 1/4" Shoulder Screw In Alloy Steel With Alumazite KL-55 Blue Coating

This is an example of blue coated aerospace hardware we supply, with a 1/4 diameter shoulder screw in alloy steel coated with Alumazite KL-55 blue finish.  The blue coating was intended to allow an robotic color coded system to recognize the screw and yet maintain its integrity in environments up to 600 degrees F.  The coating is also intended to limit any risk of off-gassing and usability of the hex socket drive.  Only the head is coated to avoid the complications of having any coating on the shoulder and threaded surfaces.

Custom Zinc Plated U Bolts - 5/16 X 3-1/2 With Plates & Hex Nuts

These are custom zinc plated u bolts we supplied to our customer at 150 sets that included 2 hex nuts per u bolt and a flat plate measuring 1/8 X 2 X 3-1/4 inches.  The lead time without any rush service was at 2 weeks from order confirmation.  Material certs were provided with the parts per customer specifications.  The inside width of the u bolt was set at 2 inches, inside length at 3-1/2, and 2 inches of 5/16 coarse thread was incorporated on each leg.  The sets were delivered to the customer fully assembled as shown in the picture.

Custom Black Nylon Washers - Flat Nylon Washers Dyed Black .187/.500/.040

These are custom black nylon washers that we supply to one of our oldest customers on a recurring blanket purchase order basis.  Average annual volume it approximately 800,000 pieces and we typically maintain at least a 6 month supply on hand at all times.  Actual production time required is typically 6-7 weeks from order and the flat washers measure .187 inches on the inside diameter, .500 inches on the outside diameter, and .040 inches on the thickness.